2000 BMW Alpina D10 tire and wheel sizes, bolt pattern and tire pressure

Check the tables below for every tire size, wheel size, bolt pattern (PCD), rim offset and tire pressure fitted to the 2000 BMW Alpina D10.

2000 BMW Alpina D10 tire sizes

235/40R18 265/35R18

Bolt pattern

Other years

Fitment tables

Open a trim for its factory package and every alternative size, front and rear.

2000 – 2003 1 trim

241 hp · 3.0L M57D30 I6 235/40 ZR18 91Y / 265/35 ZR18 93Y 1 fitment

GenerationE39 2000–2003

Power241 hp

Engine3.0L M57D30 I6, Diesel

Center bore74.1 mm

PCD5x120

ThreadM12 x 1.5

Tire size	Rim size and bolt pattern	Pressure, psi	Prices
Front235/40 ZR18 91Y	18x8 ET20 ~~5x120~~	38	Tires Rims
Rear265/35 ZR18 93Y	18x9 ET24 ~~5x120~~	38	Tires Rims

Reading the table

OE fitment: The package fitted at the factory for that trim.
Alternative: A size the car accepts without modification — plus-sizing, winter setups or optional wheels.
Rim size: Rim diameter × width in inches, and the factory offset (ET) in millimetres, e.g. 18x7.5 ET25.
Bolt pattern (PCD): Number of studs and the diameter of the circle they sit on. It must match exactly.
Center bore: Diameter of the hub hole. Larger aftermarket bores need hub-centric rings.
Pressure: Recommended cold inflation pressure for that axle, in psi.
Staggered: A wider tire on the rear axle than the front. Front-to-back rotation is not possible.
Thread size: Lug bolt or nut thread — needed when buying aftermarket fasteners.