Skip to content

2013 BMW Alpina D3 tire and wheel sizes, bolt pattern and tire pressure

Check the tables below for every tire size, wheel size, bolt pattern (PCD), rim offset and tire pressure fitted to the 2013 BMW Alpina D3.

Bolt pattern

2 generations were sold in 2013. Check your chassis code before ordering wheels.

Fitment tables

2 trims sold in 2013

Open a trim for its factory package and every alternative size, front and rear. More than one generation was on sale this year — check the chassis code against your VIN before ordering.

BMW Alpina D3 F30/F31

2013 – 2019 1 trim

D3 D3

345 hp · 3.0L I6 245/35 ZR19 93Y / 265/35 ZR19 98Y 3 fitments
GenerationF30/F31 2013–2019
Power345 hp
Engine3.0L I6, Diesel
Center bore72.6 mm
PCD5x120
ThreadM12 x 1.5
Tire sizeRim size and bolt patternPressure, psiPrices
Front245/35 ZR19 93Y19x8 ET36 5x120TiresRims
Rear265/35 ZR19 98Y19x9 ET47 5x120TiresRims
Front245/35 ZR19 93W19x8 ET36 5x120TiresRims
Rear245/35 ZR19 93W19x9 ET47 5x120TiresRims
Front245/30 ZR20 90Y20x8 ET36 5x120TiresRims
Rear265/30 ZR20 94Y20x9 ET47 5x120TiresRims

BMW Alpina D3 E90/E91/E92 Facelift

2010 – 2013 1 trim

D3 D3 Bi-Turbo

211 hp · N47D20D I4 245/40 ZR18 93Y / 265/40 ZR18 97Y 5 fitments
GenerationE90/E91/E92 Facelift 2010–2013
Power211 hp
EngineN47D20D I4, Diesel
Center bore72.6 mm
PCD5x120
ThreadM12 x 1.5
Tire sizeRim size and bolt patternPressure, psiPrices
Front245/40 ZR18 93Y18x8 ET34 5x120TiresRims
Rear265/40 ZR18 97Y18x9 ET36 5x120TiresRims
Front245/35 ZR19 93Y19x8 ET34 5x120TiresRims
Rear265/35 ZR19 98Y19x9 ET39 5x120TiresRims
Front245/35 ZR19 93Y19x8.5 ET34 5x120TiresRims
Rear265/35 ZR19 98Y19x9.5 ET36 5x120TiresRims
235/40 R1818x8 ET34 5x120TiresRims
245/35 ZR19 93W19x8 ET34 5x120TiresRims
Reading the table

What these columns mean

OE fitment
The package fitted at the factory for that trim.
Alternative
A size the car accepts without modification — plus-sizing, winter setups or optional wheels.
Rim size
Rim diameter × width in inches, and the factory offset (ET) in millimetres, e.g. 18x7.5 ET25.
Bolt pattern (PCD)
Number of studs and the diameter of the circle they sit on. It must match exactly.
Center bore
Diameter of the hub hole. Larger aftermarket bores need hub-centric rings.
Pressure
Recommended cold inflation pressure for that axle, in psi.
Staggered
A wider tire on the rear axle than the front. Front-to-back rotation is not possible.
Thread size
Lug bolt or nut thread — needed when buying aftermarket fasteners.

Considering a different size?

Run your OE size against the one you want to see diameter change, ground clearance and speedometer error.