2024 BMW Alpina D4 tire and wheel sizes, bolt pattern and tire pressure

Check the tables below for every tire size, wheel size, bolt pattern (PCD), rim offset and tire pressure fitted to the 2024 BMW Alpina D4.

2024 BMW Alpina D4 tire sizes

255/35R20 285/30R20

Bolt pattern

5x112

2 generations were sold in 2024. Check your chassis code before ordering wheels.

Other years

2016 2017 2018 2019 2022 2023 2024 2025 All 2014–2025

Fitment tables

3 trims sold in 2024

Open a trim for its factory package and every alternative size, front and rear. More than one generation was on sale this year — check the chassis code against your VIN before ordering.

BMW Alpina D4 G26 LCI

2024 – 2027 1 trim

D4 D4 S

350 hp · 3.0 L Diesel 3.0 L 255/35 ZR20 / 285/30 ZR20 1 fitment

GenerationG26 LCI 2024–2027

MarketEurope

Power350 hp

Engine3.0 L Diesel 3.0 L, Diesel

Center bore66.6 mm

PCD5x112

ThreadM14 x 1.25

Fit	Tire size	Rim size and bolt pattern	Pressure, psi	Prices
OE	Front255/35 ZR20	20x8.5 ET32 ~~5x112~~	–	Tires Rims
	Rear285/30 ZR20	20x10 ET48 ~~5x112~~	–	Tires Rims

BMW Alpina D4 G26

2022 – 2024 2 trims

D4 D4 S

350 hp · 3.0 L Diesel 3.0 L 255/35 ZR20 / 285/30 ZR20 1 fitment

GenerationG26 2022–2024

MarketEurope

Power350 hp

Engine3.0 L Diesel 3.0 L, Diesel

Center bore66.6 mm

PCD5x112

ThreadM14 x 1.25

Fit	Tire size	Rim size and bolt pattern	Pressure, psi	Prices
OE	Front255/35 ZR20	20x8.5 ET32 ~~5x112~~	–	Tires Rims
	Rear285/30 ZR20	20x10 ET48 ~~5x112~~	–	Tires Rims

D4 D4 S (7CA-4U40)

350 hp · 3.0 L Diesel 3.0 L x 1 fitment

GenerationG26 2022–2024

MarketJapan

Power350 hp

Engine3.0 L Diesel 3.0 L, Diesel

Center bore66.6 mm

PCD5x112

ThreadM14 x 1.25

Fit	Tire size	Rim size and bolt pattern	Pressure, psi	Prices
OE	x	~~5x112~~	–	Tires

Reading the table

What these columns mean

OE fitment: The package fitted at the factory for that trim.
Alternative: A size the car accepts without modification — plus-sizing, winter setups or optional wheels.
Rim size: Rim diameter × width in inches, and the factory offset (ET) in millimetres, e.g. 18x7.5 ET25.
Bolt pattern (PCD): Number of studs and the diameter of the circle they sit on. It must match exactly.
Center bore: Diameter of the hub hole. Larger aftermarket bores need hub-centric rings.
Pressure: Recommended cold inflation pressure for that axle, in psi.
Staggered: A wider tire on the rear axle than the front. Front-to-back rotation is not possible.
Thread size: Lug bolt or nut thread — needed when buying aftermarket fasteners.