Skip to content

2017 BMW Alpina D5 tire and wheel sizes, bolt pattern and tire pressure

Check the tables below for every tire size, wheel size, bolt pattern (PCD), rim offset and tire pressure fitted to the 2017 BMW Alpina D5.

2017 BMW Alpina D5 tire sizes

Bolt patterns
5x112
G30/G31
5x120
F10/F11 Facelift

2 generations were sold in 2017. Check your chassis code before ordering wheels.

Fitment tables

3 trims sold in 2017

Open a trim for its factory package and every alternative size, front and rear. More than one generation was on sale this year — check the chassis code against your VIN before ordering.

BMW Alpina D5 G30/G31

2017 – 2023 2 trims

D5 D5 S

382 hp · I6 255/35 ZR20 97Y / 295/30 ZR20 101Y 2 fitments
GenerationG30/G31 2017–2023
MarketEurope
Power382 hp
EngineI6, Diesel
Center bore66.6 mm
PCD5x112
ThreadM14 x 1.25
Tire sizeRim size and bolt patternPressure, psiPrices
Front255/35 ZR20 97Y20x8.5 ET25 5x112–TiresRims
Rear295/30 ZR20 101Y20x10 ET41 5x112–TiresRims
Front255/35 ZR20 97W20x8.5 ET25 5x112–TiresRims
Rear285/30 ZR20 99W20x10 ET41 5x112–TiresRims

D5 D5 S (FDA-5U20)

322 hp · I6 255/35 ZR20 97Y / 295/30 ZR20 101Y 2 fitments
GenerationG30/G31 2017–2023
MarketJapan
Power322 hp
EngineI6, Diesel
Center bore66.6 mm
PCD5x112
ThreadM14 x 1.25
Tire sizeRim size and bolt patternPressure, psiPrices
Front255/35 ZR20 97Y20x8.5 ET25 5x112–TiresRims
Rear295/30 ZR20 101Y20x10 ET41 5x112–TiresRims
Front255/35 ZR20 97W20x8.5 ET25 5x112–TiresRims
Rear285/30 ZR20 99W20x10 ET41 5x112–TiresRims

BMW Alpina D5 F10/F11 Facelift

2013 – 2017 1 trim

D5 D5

345 hp · 3.0L I6 255/35 R20 / 285/30 R20 2 fitments
GenerationF10/F11 Facelift 2013–2017
MarketEurope
Power345 hp
Engine3.0L I6, Diesel
Center bore72.6 mm
PCD5x120
ThreadM14 x 1.25
Tire sizeRim size and bolt patternPressure, psiPrices
Front255/35 R2020x8.5 ET33 5x120–TiresRims
Rear285/30 R2020x9.5 ET44 5x120–TiresRims
Front255/35 ZR20 97W20x8.5 ET33 5x120–TiresRims
Rear255/35 ZR20 97W20x9.5 ET44 5x120–TiresRims
Reading the table

What these columns mean

OE fitment
The package fitted at the factory for that trim.
Alternative
A size the car accepts without modification — plus-sizing, winter setups or optional wheels.
Rim size
Rim diameter × width in inches, and the factory offset (ET) in millimetres, e.g. 18x7.5 ET25.
Bolt pattern (PCD)
Number of studs and the diameter of the circle they sit on. It must match exactly.
Center bore
Diameter of the hub hole. Larger aftermarket bores need hub-centric rings.
Pressure
Recommended cold inflation pressure for that axle, in psi.
Staggered
A wider tire on the rear axle than the front. Front-to-back rotation is not possible.
Thread size
Lug bolt or nut thread — needed when buying aftermarket fasteners.

Considering a different size?

Run your OE size against the one you want to see diameter change, ground clearance and speedometer error.