Skip to content

2004 BMW Alpina Roadster tire and wheel sizes, bolt pattern and tire pressure

Check the tables below for every tire size, wheel size, bolt pattern (PCD), rim offset and tire pressure fitted to the 2004 BMW Alpina Roadster.

2004 BMW Alpina Roadster tire sizes

Bolt pattern
Fitment tables

2 trims sold in 2004

Open a trim for its factory package and every alternative size, front and rear.

BMW Alpina Roadster E85

2003 – 2006 2 trims

Roadster S 3.3

296 hp · I6 225/40 ZR18 88Y / 255/35 ZR18 90Y 2 fitments
GenerationE85 2003–2006
MarketEurope
Power296 hp
EngineI6, Petrol
Center bore72.6 mm
PCD5x120
ThreadM12 x 1.5
Tire sizeRim size and bolt patternPressure, psiPrices
Front225/40 ZR18 88Y18x8 ET45 5x12030TiresRims
Rear255/35 ZR18 90Y18x9 ET38 5x12032TiresRims
Front235/35 ZR19 91Y19x8.5 ET47 5x12030TiresRims
Rear265/30 ZR19 93Y19x9.5 ET47 5x12032TiresRims

Roadster S 3.3 (ABA-PE52)

306 hp · I6 225/40 ZR18 88Y / 255/35 ZR18 90Y 2 fitments
GenerationE85 2003–2006
MarketJapan
Power306 hp
EngineI6, Petrol
Center bore72.6 mm
PCD5x120
ThreadM12 x 1.5
Tire sizeRim size and bolt patternPressure, psiPrices
Front225/40 ZR18 88Y18x8 ET45 5x12030TiresRims
Rear255/35 ZR18 90Y18x9 ET38 5x12032TiresRims
Front235/35 ZR19 91Y19x8.5 ET47 5x12030TiresRims
Rear265/30 ZR19 93Y19x9.5 ET47 5x12032TiresRims
Reading the table

What these columns mean

OE fitment
The package fitted at the factory for that trim.
Alternative
A size the car accepts without modification — plus-sizing, winter setups or optional wheels.
Rim size
Rim diameter × width in inches, and the factory offset (ET) in millimetres, e.g. 18x7.5 ET25.
Bolt pattern (PCD)
Number of studs and the diameter of the circle they sit on. It must match exactly.
Center bore
Diameter of the hub hole. Larger aftermarket bores need hub-centric rings.
Pressure
Recommended cold inflation pressure for that axle, in psi.
Staggered
A wider tire on the rear axle than the front. Front-to-back rotation is not possible.
Thread size
Lug bolt or nut thread — needed when buying aftermarket fasteners.

Considering a different size?

Run your OE size against the one you want to see diameter change, ground clearance and speedometer error.