Skip to content

2013 BMW 4 Series Gran Coupe tire and wheel sizes, bolt pattern and tire pressure

Check the tables below for every tire size, wheel size, bolt pattern (PCD), rim offset and tire pressure fitted to the 2013 BMW 4 Series Gran Coupe.

Bolt pattern
Fitment tables

1 trim sold in 2013

Open a trim for its factory package and every alternative size, front and rear.

BMW 4 Series Gran Coupe F36

2014 – 2017 1 trim

4 Series Gran Coupe 420i (Gran Coupe, 5d)

181 hp · 2.0 L Petrol 2.0 L 225/50 ZR17 8 fitments
GenerationF36 2014–2017
MarketMexico
Power181 hp
Engine2.0 L Petrol 2.0 L, Petrol
Center bore72.6 mm
PCD5x120
ThreadM14 x 1.25
FitTire sizeRim size and bolt patternPressure, psiPrices
OE225/50 ZR1717x7.5 ET37 5x12029 F / 32 RTiresRims
OE225/45 ZR1818x8 ET34 5x12029 F / 32 RTiresRims
Alt225/55 R1616x7.5 ET37 5x12029 F / 32 RTiresRims
Alt225/50 R1717x7.5 ET37 5x12029 F / 32 RTiresRims
AltFront225/45 ZR1818x8 ET34 5x12029TiresRims
Rear255/40 ZR1818x8.5 ET47 5x12032TiresRims
Alt225/45 R1818x8 ET34 5x12029 F / 32 RTiresRims
AltFront225/40 ZR1919x8 ET36 5x12029TiresRims
Rear255/35 ZR1919x8.5 ET47 5x12032TiresRims
AltFront225/35 ZR2020x8 ET36 5x12029TiresRims
Rear255/30 ZR2020x8.5 ET47 5x12032TiresRims
Reading the table

What these columns mean

OE fitment
The package fitted at the factory for that trim.
Alternative
A size the car accepts without modification — plus-sizing, winter setups or optional wheels.
Rim size
Rim diameter × width in inches, and the factory offset (ET) in millimetres, e.g. 18x7.5 ET25.
Bolt pattern (PCD)
Number of studs and the diameter of the circle they sit on. It must match exactly.
Center bore
Diameter of the hub hole. Larger aftermarket bores need hub-centric rings.
Pressure
Recommended cold inflation pressure for that axle, in psi.
Staggered
A wider tire on the rear axle than the front. Front-to-back rotation is not possible.
Thread size
Lug bolt or nut thread — needed when buying aftermarket fasteners.

Considering a different size?

Run your OE size against the one you want to see diameter change, ground clearance and speedometer error.