Skip to content

2000 BMW M Roadster tire and wheel sizes, bolt pattern and tire pressure

Check the tables below for every tire size, wheel size, bolt pattern (PCD), rim offset and tire pressure fitted to the 2000 BMW M Roadster.

2000 BMW M Roadster tire sizes

Bolt pattern
Fitment tables

3 trims sold in 2000

Open a trim for its factory package and every alternative size, front and rear.

BMW M Roadster E36

1997 – 2003 3 trims

M Roadster M 3.2i

240 hp · 3.2L S52B32 I6 225/45 ZR17 90Z / 245/40 ZR17 91Z 1 fitment
GenerationE36 1997–2003
MarketUSA
Power240 hp
Engine3.2L S52B32 I6, Petrol
Center bore72.6 mm
PCD5x120
ThreadM12 x 1.5
Tire sizeRim size and bolt patternPressure, psiPrices
Front225/45 ZR17 90Z17x7.5 ET41 5x12029TiresRims
Rear245/40 ZR17 91Z17x9 ET8 5x12029TiresRims

M Roadster M 3.2i

316 hp · S50B32 I6 225/45 ZR17 90Z / 245/40 ZR17 91Z 1 fitment
GenerationE36 1997–2003
MarketEurope
Power316 hp
EngineS50B32 I6, Petrol
Center bore72.6 mm
PCD5x120
ThreadM12 x 1.5
Tire sizeRim size and bolt patternPressure, psiPrices
Front225/45 ZR17 90Z17x7.5 ET41 5x12029TiresRims
Rear245/40 ZR17 91Z17x9 ET8 5x12029TiresRims

M Roadster M 3.2i (GF-CK32)

316 hp · 326S I6 225/45 ZR17 90Z 1 fitment
GenerationE36 1997–2003
MarketJapan
Power316 hp
Engine326S I6, Petrol
Center bore72.6 mm
PCD5x120
ThreadM12 x 1.5
Tire sizeRim size and bolt patternPressure, psiPrices
225/45 ZR17 90Z17x9 ET8 5x12029TiresRims
Reading the table

What these columns mean

OE fitment
The package fitted at the factory for that trim.
Alternative
A size the car accepts without modification — plus-sizing, winter setups or optional wheels.
Rim size
Rim diameter × width in inches, and the factory offset (ET) in millimetres, e.g. 18x7.5 ET25.
Bolt pattern (PCD)
Number of studs and the diameter of the circle they sit on. It must match exactly.
Center bore
Diameter of the hub hole. Larger aftermarket bores need hub-centric rings.
Pressure
Recommended cold inflation pressure for that axle, in psi.
Staggered
A wider tire on the rear axle than the front. Front-to-back rotation is not possible.
Thread size
Lug bolt or nut thread — needed when buying aftermarket fasteners.

Considering a different size?

Run your OE size against the one you want to see diameter change, ground clearance and speedometer error.