2011 Brilliance M1 tire and wheel sizes, bolt pattern and tire pressure

Check the tables below for every tire size, wheel size, bolt pattern (PCD), rim offset and tire pressure fitted to the 2011 Brilliance M1.

2011 Brilliance M1 tire sizes

Bolt pattern

Other years

Fitment tables

Open a trim for its factory package and every alternative size, front and rear.

2004 – 2011 2 trims

168 hp · 1.8L I4 195/65 R15 3 fitments

GenerationM1 2004–2011

Power168 hp

Engine1.8L I4, Petrol

Center bore68 mm

PCD5x108

ThreadN/A

Tire size	Rim size and bolt pattern	Pressure, psi	Prices
195/65 R15	15x6 ET42 ~~5x108~~	–	Tires Rims
205/55 R16	16x7 ET46 ~~5x108~~	–	Tires Rims
205/50 R17	17x7.5 ET40 ~~5x108~~	–	Tires Rims

137 hp · I4 205/55 R16 1 fitment

GenerationM1 2004–2011

Power137 hp

EngineI4, Petrol

Center bore68 mm

PCD5x108

ThreadN/A

Tire size	Rim size and bolt pattern	Pressure, psi	Prices
205/55 R16	16x7 ET46 ~~5x108~~	–	Tires Rims

Reading the table

OE fitment: The package fitted at the factory for that trim.
Alternative: A size the car accepts without modification — plus-sizing, winter setups or optional wheels.
Rim size: Rim diameter × width in inches, and the factory offset (ET) in millimetres, e.g. 18x7.5 ET25.
Bolt pattern (PCD): Number of studs and the diameter of the circle they sit on. It must match exactly.
Center bore: Diameter of the hub hole. Larger aftermarket bores need hub-centric rings.
Pressure: Recommended cold inflation pressure for that axle, in psi.
Staggered: A wider tire on the rear axle than the front. Front-to-back rotation is not possible.
Thread size: Lug bolt or nut thread — needed when buying aftermarket fasteners.