2010 Buick Allure tire and wheel sizes, bolt pattern and tire pressure

Check the tables below for every tire size, wheel size, bolt pattern (PCD), rim offset and tire pressure fitted to the 2010 Buick Allure.

2010 Buick Allure tire sizes

Bolt pattern

Other years

Fitment tables

Open a trim for its factory package and every alternative size, front and rear.

2010 – 2010 2 trims

255 hp · 3.0L V6 245/50 R17 98H 4 fitments

GenerationII 2010–2010

Power255 hp

Engine3.0L V6, Petrol

Center bore66.9 mm

PCD5x120

ThreadM14 x 1.5

Tire size	Rim size and bolt pattern	Pressure, psi	Prices
245/50 R17 98H	17x7 ET42 ~~5x120~~	35	Tires Rims
235/50 R18 97V	18x8 ET42 ~~5x120~~	35	Tires Rims
245/45 R18 100V	18x8 ET42 ~~5x120~~	35	Tires Rims
245/40 R19 98V	19x8.5 ET40 ~~5x120~~	35	Tires Rims

280 hp · 3.6L V6 245/50 R17 99H 4 fitments

GenerationII 2010–2010

Power280 hp

Engine3.6L V6, Petrol

Center bore66.9 mm

PCD5x120

ThreadM14 x 1.5

Tire size	Rim size and bolt pattern	Pressure, psi	Prices
245/50 R17 99H	17x7 ET42 ~~5x120~~	35	Tires Rims
235/50 R18 97V	18x8 ET42 ~~5x120~~	35	Tires Rims
245/45 R18 100V	18x8 ET42 ~~5x120~~	35	Tires Rims
245/40 R19 98W	19x8.5 ET40 ~~5x120~~	35	Tires Rims

Reading the table

OE fitment: The package fitted at the factory for that trim.
Alternative: A size the car accepts without modification — plus-sizing, winter setups or optional wheels.
Rim size: Rim diameter × width in inches, and the factory offset (ET) in millimetres, e.g. 18x7.5 ET25.
Bolt pattern (PCD): Number of studs and the diameter of the circle they sit on. It must match exactly.
Center bore: Diameter of the hub hole. Larger aftermarket bores need hub-centric rings.
Pressure: Recommended cold inflation pressure for that axle, in psi.
Staggered: A wider tire on the rear axle than the front. Front-to-back rotation is not possible.
Thread size: Lug bolt or nut thread — needed when buying aftermarket fasteners.