Skip to content

2022 Buick Envision tire and wheel sizes, bolt pattern and tire pressure

Check the tables below for every tire size, wheel size, bolt pattern (PCD), rim offset and tire pressure fitted to the 2022 Buick Envision.

Bolt patterns
5x115
I Facelift

2 generations were sold in 2022. Check your chassis code before ordering wheels.

Fitment tables

3 trims sold in 2022

Open a trim for its factory package and every alternative size, front and rear. More than one generation was on sale this year — check the chassis code against your VIN before ordering.

Buick Envision I Facelift

2020 – 2022 China market 1 trim

Envision 1.5T

166 hp · 1.5L LFV I4 225/65 R17 102H 3 fitments
GenerationI Facelift 2020–2022
MarketChina
Power166 hp
Engine1.5L LFV I4, Petrol
Center bore70.3 mm
PCD5x115
ThreadM12 x 1.5
Tire sizeRim size and bolt patternPressure, psiPrices
225/65 R17 102H17x7 ET43 5x11535TiresRims
225/60 R18 100H18x7.5 ET43 5x11535TiresRims
235/50 R19 99H19x7.5 ET46 5x11535TiresRims

Buick Envision II

2020 – 2023 2 trims

Envision 2.0T

228 hp · 2.0L LSY I4 235/55 R18 100H 4 fitments
GenerationII 2020–2023
MarketUSA
Power228 hp
Engine2.0L LSY I4, Petrol
Center bore66.9 mm
PCD5x120
ThreadM14 x 1.5
Tire sizeRim size and bolt patternPressure, psiPrices
235/55 R18 100H18x8 ET37 5x12033TiresRims
245/45 R20 99H20x8.5 ET37 5x12033TiresRims
235/50 R19 99H19x8 ET37 5x12033TiresRims
245/50 R19 101H19x8 ET37 5x12033TiresRims

Envision 2.0T

237 hp · 2.0L LSY I4 235/55 R18 100H 4 fitments
GenerationII 2020–2023
MarketMexico
Power237 hp
Engine2.0L LSY I4, Petrol
Center bore66.9 mm
PCD5x120
ThreadM14 x 1.5
Tire sizeRim size and bolt patternPressure, psiPrices
235/55 R18 100H18x8 ET37 5x12033TiresRims
245/45 R20 99H20x8.5 ET37 5x12033TiresRims
235/50 R19 99H19x8 ET37 5x12033TiresRims
245/50 R19 101H19x8 ET37 5x12033TiresRims
Reading the table

What these columns mean

OE fitment
The package fitted at the factory for that trim.
Alternative
A size the car accepts without modification — plus-sizing, winter setups or optional wheels.
Rim size
Rim diameter × width in inches, and the factory offset (ET) in millimetres, e.g. 18x7.5 ET25.
Bolt pattern (PCD)
Number of studs and the diameter of the circle they sit on. It must match exactly.
Center bore
Diameter of the hub hole. Larger aftermarket bores need hub-centric rings.
Pressure
Recommended cold inflation pressure for that axle, in psi.
Staggered
A wider tire on the rear axle than the front. Front-to-back rotation is not possible.
Thread size
Lug bolt or nut thread — needed when buying aftermarket fasteners.

Considering a different size?

Run your OE size against the one you want to see diameter change, ground clearance and speedometer error.