Skip to content

2008 Buick LaCrosse tire and wheel sizes, bolt pattern and tire pressure

Check the tables below for every tire size, wheel size, bolt pattern (PCD), rim offset and tire pressure fitted to the 2008 Buick LaCrosse.

Bolt pattern

2 generations were sold in 2008. Check your chassis code before ordering wheels.

Fitment tables

4 trims sold in 2008

Open a trim for its factory package and every alternative size, front and rear. More than one generation was on sale this year — check the chassis code against your VIN before ordering.

Buick LaCrosse I Facelift

2008 – 2009 USA market 3 trims

LaCrosse 3.6i

240 hp · 3.6L LY7 V6 225/55 R17 97V 4 fitments
GenerationI Facelift 2008–2009
MarketUSA
Power240 hp
Engine3.6L LY7 V6, Petrol
Center bore70.3 mm
PCD5x115
ThreadM12 x 1.5
Tire sizeRim size and bolt patternPressure, psiPrices
225/55 R17 97V17x6.5 ET52 5x11535TiresRims
245/50 R17 99V17x7.5 ET50 5x11535TiresRims
235/50 R18 97V18x7 ET52 5x11535TiresRims
245/45 R18 96W18x7.5 ET50 5x11535TiresRims

LaCrosse 3.8i

200 hp · 3.8L L26 V6 225/60 R16 97S 4 fitments
GenerationI Facelift 2008–2009
MarketUSA
Power200 hp
Engine3.8L L26 V6, Petrol
Center bore70.3 mm
PCD5x115
ThreadM12 x 1.5
Tire sizeRim size and bolt patternPressure, psiPrices
225/60 R16 97S16x6.5 ET52 5x11535TiresRims
225/55 R17 97V17x6.5 ET52 5x11535TiresRims
225/50 R18 95V18x7 ET52 5x11535TiresRims
235/50 R18 97V18x7 ET52 5x11535TiresRims

LaCrosse 5.3i

300 hp · 5.3L LS4 V8 235/50 R18 97W 4 fitments
GenerationI Facelift 2008–2009
MarketUSA
Power300 hp
Engine5.3L LS4 V8, Petrol
Center bore70.3 mm
PCD5x115
ThreadM12 x 1.5
Tire sizeRim size and bolt patternPressure, psiPrices
235/50 R18 97W18x7 ET52 5x11535TiresRims
225/55 R17 97V17x6.5 ET52 5x11535TiresRims
245/45 R18 96W18x7.5 ET50 5x11535TiresRims
245/45 R18 96W18x8 ET48 5x11535TiresRims
Reading the table

What these columns mean

OE fitment
The package fitted at the factory for that trim.
Alternative
A size the car accepts without modification — plus-sizing, winter setups or optional wheels.
Rim size
Rim diameter × width in inches, and the factory offset (ET) in millimetres, e.g. 18x7.5 ET25.
Bolt pattern (PCD)
Number of studs and the diameter of the circle they sit on. It must match exactly.
Center bore
Diameter of the hub hole. Larger aftermarket bores need hub-centric rings.
Pressure
Recommended cold inflation pressure for that axle, in psi.
Staggered
A wider tire on the rear axle than the front. Front-to-back rotation is not possible.
Thread size
Lug bolt or nut thread — needed when buying aftermarket fasteners.

Considering a different size?

Run your OE size against the one you want to see diameter change, ground clearance and speedometer error.