Skip to content

2025 Buick LaCrosse tire and wheel sizes, bolt pattern and tire pressure

Check the tables below for every tire size, wheel size, bolt pattern (PCD), rim offset and tire pressure fitted to the 2025 Buick LaCrosse.

2025 Buick LaCrosse tire sizes

Bolt pattern
Fitment tables

2 trims sold in 2025

Open a trim for its factory package and every alternative size, front and rear.

Buick LaCrosse IV

2023 – 2027 2 trims

LaCrosse 1.5T (Saloon)

177 hp · 1.5 L Petrol 1.5 L 225/60 R17 4 fitments
GenerationIV 2023–2027
MarketChina
Power177 hp
Engine1.5 L Petrol 1.5 L, Petrol
Center bore70.3 mm
PCD5x115
ThreadM12 x 1.5
FitTire sizeRim size and bolt patternPressure, psiPrices
OE225/60 R1717x7.5 ET40 5x115–TiresRims
Alt225/55 R1818x7.5 ET40 5x115–TiresRims
Alt245/45 R1919x8 ET40 5x115–TiresRims
Alt245/40 R2020x8 ET40 5x115–TiresRims

LaCrosse 2.0T (Saloon)

233 hp · 2.0 L Petrol 2.0 L 225/55 R18 4 fitments
GenerationIV 2023–2027
MarketChina
Power233 hp
Engine2.0 L Petrol 2.0 L, Petrol
Center bore70.3 mm
PCD5x115
ThreadM12 x 1.5
FitTire sizeRim size and bolt patternPressure, psiPrices
OE225/55 R1818x7.5 ET40 5x115–TiresRims
OE245/45 R1919x8 ET40 5x115–TiresRims
Alt225/60 R1717x7.5 ET40 5x115–TiresRims
Alt245/40 R2020x8 ET40 5x115–TiresRims
Reading the table

What these columns mean

OE fitment
The package fitted at the factory for that trim.
Alternative
A size the car accepts without modification — plus-sizing, winter setups or optional wheels.
Rim size
Rim diameter × width in inches, and the factory offset (ET) in millimetres, e.g. 18x7.5 ET25.
Bolt pattern (PCD)
Number of studs and the diameter of the circle they sit on. It must match exactly.
Center bore
Diameter of the hub hole. Larger aftermarket bores need hub-centric rings.
Pressure
Recommended cold inflation pressure for that axle, in psi.
Staggered
A wider tire on the rear axle than the front. Front-to-back rotation is not possible.
Thread size
Lug bolt or nut thread — needed when buying aftermarket fasteners.

Considering a different size?

Run your OE size against the one you want to see diameter change, ground clearance and speedometer error.