Skip to content

1994 Buick Park Avenue tire and wheel sizes, bolt pattern and tire pressure

Check the tables below for every tire size, wheel size, bolt pattern (PCD), rim offset and tire pressure fitted to the 1994 Buick Park Avenue.

1994 Buick Park Avenue tire sizes

Bolt pattern
Fitment tables

3 trims sold in 1994

Open a trim for its factory package and every alternative size, front and rear.

Buick Park Avenue I

1990 – 1996 USA market 3 trims

Park Avenue 3.8

201 hp · L36 V6 215/70 R15 97S 2 fitments
GenerationI 1990–1996
Power201 hp
EngineL36 V6, Petrol
Center bore70.3 mm
PCD5x115
Thread1/2" - 20 UNF
Tire sizeRim size and bolt patternPressure, psiPrices
215/70 R15 97S15x6 ET38 5x11530TiresRims
225/60 R16 98H16x6.5 ET38 5x11530TiresRims

Park Avenue 3.8

170 hp · L27 V6 205/75 R14 95S 2 fitments
GenerationI 1990–1996
Power170 hp
EngineL27 V6, Petrol
Center bore70.3 mm
PCD5x115
Thread1/2" - 20 UNF
Tire sizeRim size and bolt patternPressure, psiPrices
205/75 R14 95S14x6 ET38 5x11529TiresRims
215/70 R15 97S15x6 ET38 5x11530TiresRims

Park Avenue 3.8SC

225 hp · 3.8L L67 V6 215/70 R15 97S 2 fitments
GenerationI 1990–1996
Power225 hp
Engine3.8L L67 V6, Petrol
Center bore70.3 mm
PCD5x115
Thread1/2" - 20 UNF
Tire sizeRim size and bolt patternPressure, psiPrices
215/70 R15 97S15x6 ET38 5x11530TiresRims
225/60 R16 98H16x6.5 ET38 5x11530TiresRims
Reading the table

What these columns mean

OE fitment
The package fitted at the factory for that trim.
Alternative
A size the car accepts without modification — plus-sizing, winter setups or optional wheels.
Rim size
Rim diameter × width in inches, and the factory offset (ET) in millimetres, e.g. 18x7.5 ET25.
Bolt pattern (PCD)
Number of studs and the diameter of the circle they sit on. It must match exactly.
Center bore
Diameter of the hub hole. Larger aftermarket bores need hub-centric rings.
Pressure
Recommended cold inflation pressure for that axle, in psi.
Staggered
A wider tire on the rear axle than the front. Front-to-back rotation is not possible.
Thread size
Lug bolt or nut thread — needed when buying aftermarket fasteners.

Considering a different size?

Run your OE size against the one you want to see diameter change, ground clearance and speedometer error.