1996 Buick Regal tire and wheel sizes, bolt pattern and tire pressure

Check the tables below for every tire size, wheel size, bolt pattern (PCD), rim offset and tire pressure fitted to the 1996 Buick Regal.

1996 Buick Regal tire sizes

Bolt pattern

Other years

Fitment tables

Open a trim for its factory package and every alternative size, front and rear.

1987 – 1996 USA market 2 trims

160 hp · L82 V6 205/70 SR14 2 fitments

GenerationIII 1987–1996

Power160 hp

EngineL82 V6, Petrol

Center bore70.3 mm

PCD5x115

Thread1/2" - 20 UNF

Tire size	Rim size and bolt pattern	Pressure, psi	Prices
205/70 SR14	14x5.5 ET38 ~~5x115~~	–	Tires Rims
215/65 HR15	15x6 ET38 ~~5x115~~	–	Tires Rims

200 hp · L36 V6 205/70 SR14 2 fitments

GenerationIII 1987–1996

Power200 hp

EngineL36 V6, Petrol

Center bore70.3 mm

PCD5x115

Thread1/2" - 20 UNF

Tire size	Rim size and bolt pattern	Pressure, psi	Prices
205/70 SR14	14x5.5 ET38 ~~5x115~~	–	Tires Rims
215/65 HR15	15x6 ET38 ~~5x115~~	–	Tires Rims

Reading the table

OE fitment: The package fitted at the factory for that trim.
Alternative: A size the car accepts without modification — plus-sizing, winter setups or optional wheels.
Rim size: Rim diameter × width in inches, and the factory offset (ET) in millimetres, e.g. 18x7.5 ET25.
Bolt pattern (PCD): Number of studs and the diameter of the circle they sit on. It must match exactly.
Center bore: Diameter of the hub hole. Larger aftermarket bores need hub-centric rings.
Pressure: Recommended cold inflation pressure for that axle, in psi.
Staggered: A wider tire on the rear axle than the front. Front-to-back rotation is not possible.
Thread size: Lug bolt or nut thread — needed when buying aftermarket fasteners.