1969 Buick Riviera tire and wheel sizes, bolt pattern and tire pressure

Check the tables below for every tire size, wheel size, bolt pattern (PCD), rim offset and tire pressure fitted to the 1969 Buick Riviera.

1969 Buick Riviera tire sizes

225/75RS15

Bolt pattern

Other years

Fitment tables

Open a trim for its factory package and every alternative size, front and rear.

1966 – 1970 USA market 2 trims

362 hp · 7.0L V8 205x SR15 2 fitments

GenerationII 1966–1970

Power362 hp

Engine7.0L V8, Petrol

Center bore78.3 mm

PCD5x127

Thread1/2" - 20 UNF

Tire size	Rim size and bolt pattern	Pressure, psi	Prices
205x SR15	15x6 ET0 ~~5x127~~	–	Tires Rims
225/75 SR15	15x6 ET0 ~~5x127~~	–	Tires Rims

375 hp · 7.5L V8 205x SR15 2 fitments

GenerationII 1966–1970

Power375 hp

Engine7.5L V8, Petrol

Center bore78.3 mm

PCD5x127

Thread1/2" - 20 UNF

Tire size	Rim size and bolt pattern	Pressure, psi	Prices
205x SR15	15x6 ET0 ~~5x127~~	–	Tires Rims
225/75 SR15	15x6 ET0 ~~5x127~~	–	Tires Rims

Reading the table

OE fitment: The package fitted at the factory for that trim.
Alternative: A size the car accepts without modification — plus-sizing, winter setups or optional wheels.
Rim size: Rim diameter × width in inches, and the factory offset (ET) in millimetres, e.g. 18x7.5 ET25.
Bolt pattern (PCD): Number of studs and the diameter of the circle they sit on. It must match exactly.
Center bore: Diameter of the hub hole. Larger aftermarket bores need hub-centric rings.
Pressure: Recommended cold inflation pressure for that axle, in psi.
Staggered: A wider tire on the rear axle than the front. Front-to-back rotation is not possible.
Thread size: Lug bolt or nut thread — needed when buying aftermarket fasteners.