1980 Buick Riviera tire and wheel sizes, bolt pattern and tire pressure

Check the tables below for every tire size, wheel size, bolt pattern (PCD), rim offset and tire pressure fitted to the 1980 Buick Riviera.

1980 Buick Riviera tire sizes

Bolt pattern

Other years

Fitment tables

Open a trim for its factory package and every alternative size, front and rear.

1979 – 1985 2 trims

185 hp · 3.8L LC8 V6 205/75 SR15 2 fitments

GenerationVI 1979–1985

Power185 hp

Engine3.8L LC8 V6, Petrol

Center bore70.3 mm

PCD5x120.65

ThreadM12 x 1.5

Tire size	Rim size and bolt pattern	Pressure, psi	Prices
205/75 SR15	15x6 ~~5x120.65~~	1.9	Tires Rims
225/70 SR15	15x6 ~~5x120.65~~	1.9	Tires Rims

174 hp · 5.7L L34 V8 205/75 SR15 2 fitments

GenerationVI 1979–1985

Power174 hp

Engine5.7L L34 V8, Petrol

Center bore70.3 mm

PCD5x120.65

ThreadM12 x 1.5

Tire size	Rim size and bolt pattern	Pressure, psi	Prices
205/75 SR15	15x6 ~~5x120.65~~	1.9	Tires Rims
225/70 SR15	15x6 ~~5x120.65~~	1.9	Tires Rims

Reading the table

OE fitment: The package fitted at the factory for that trim.
Alternative: A size the car accepts without modification — plus-sizing, winter setups or optional wheels.
Rim size: Rim diameter × width in inches, and the factory offset (ET) in millimetres, e.g. 18x7.5 ET25.
Bolt pattern (PCD): Number of studs and the diameter of the circle they sit on. It must match exactly.
Center bore: Diameter of the hub hole. Larger aftermarket bores need hub-centric rings.
Pressure: Recommended cold inflation pressure for that axle, in psi.
Staggered: A wider tire on the rear axle than the front. Front-to-back rotation is not possible.
Thread size: Lug bolt or nut thread — needed when buying aftermarket fasteners.