1996 Buick Skylark tire and wheel sizes, bolt pattern and tire pressure

Check the tables below for every tire size, wheel size, bolt pattern (PCD), rim offset and tire pressure fitted to the 1996 Buick Skylark.

1996 Buick Skylark tire sizes

Bolt pattern

Other years

Fitment tables

Open a trim for its factory package and every alternative size, front and rear.

1964 – 1972 USA market 2 trims

150 hp · LD9 I4 195/65 SR15 2 fitments

GenerationSkylark 1964–1972

Power150 hp

EngineLD9 I4, Petrol

Center bore57.1 mm

PCD5x100

ThreadM12 x 1.5

Tire size	Rim size and bolt pattern	Pressure, psi	Prices
195/65 SR15	15x5.5 ET38 ~~5x100~~	–	Tires Rims
205/55 HR16	16x6 ET42 ~~5x100~~	–	Tires Rims

160 hp · L82 V6 205/55 HR16 2 fitments

GenerationSkylark 1964–1972

Power160 hp

EngineL82 V6, Petrol

Center bore57.1 mm

PCD5x100

ThreadM12 x 1.5

Tire size	Rim size and bolt pattern	Pressure, psi	Prices
205/55 HR16	16x6 ET42 ~~5x100~~	–	Tires Rims
215/50 VR17	17x6.5 ET42 ~~5x100~~	–	Tires Rims

Reading the table

OE fitment: The package fitted at the factory for that trim.
Alternative: A size the car accepts without modification — plus-sizing, winter setups or optional wheels.
Rim size: Rim diameter × width in inches, and the factory offset (ET) in millimetres, e.g. 18x7.5 ET25.
Bolt pattern (PCD): Number of studs and the diameter of the circle they sit on. It must match exactly.
Center bore: Diameter of the hub hole. Larger aftermarket bores need hub-centric rings.
Pressure: Recommended cold inflation pressure for that axle, in psi.
Staggered: A wider tire on the rear axle than the front. Front-to-back rotation is not possible.
Thread size: Lug bolt or nut thread — needed when buying aftermarket fasteners.