Skip to content

2025 BYD Seal tire and wheel sizes, bolt pattern and tire pressure

Check the tables below for every tire size, wheel size, bolt pattern (PCD), rim offset and tire pressure fitted to the 2025 BYD Seal.

2025 BYD Seal tire sizes

Bolt pattern
Fitment tables

3 trims sold in 2025

Open a trim for its factory package and every alternative size, front and rear.

BYD Seal Seal

2022 – 2027 3 trims

Seal EV (EV)

308 hp · Electric x / 225/50 R18 2 fitments
GenerationSeal 2022–2027
MarketMexico
Power308 hp
EngineElectric, Electric
Center bore64.1 mm
PCD5x120
ThreadM14 x 1.5
FitTire sizeRim size and bolt patternPressure, psiPrices
OEFrontx 5x120–Tires
Rear225/50 R1818x7 ET45 5x120–TiresRims
OEFrontx 5x120–Tires
Rear235/45 R1919x8 ET45 5x120–TiresRims

Seal EV (ZAA-EKXYA) (EV)

523 hp · Electric x 1 fitment
GenerationSeal 2022–2027
MarketJapan
Power523 hp
EngineElectric, Electric
Center bore64.1 mm
PCD5x120
ThreadM14 x 1.5
FitTire sizeRim size and bolt patternPressure, psiPrices
OEx 5x120–Tires

Seal EV (ZAA-EKXYC) (EV)

308 hp · Electric x 1 fitment
GenerationSeal 2022–2027
MarketJapan
Power308 hp
EngineElectric, Electric
Center bore64.1 mm
PCD5x120
ThreadM14 x 1.5
FitTire sizeRim size and bolt patternPressure, psiPrices
OEx 5x120–Tires
Reading the table

What these columns mean

OE fitment
The package fitted at the factory for that trim.
Alternative
A size the car accepts without modification — plus-sizing, winter setups or optional wheels.
Rim size
Rim diameter × width in inches, and the factory offset (ET) in millimetres, e.g. 18x7.5 ET25.
Bolt pattern (PCD)
Number of studs and the diameter of the circle they sit on. It must match exactly.
Center bore
Diameter of the hub hole. Larger aftermarket bores need hub-centric rings.
Pressure
Recommended cold inflation pressure for that axle, in psi.
Staggered
A wider tire on the rear axle than the front. Front-to-back rotation is not possible.
Thread size
Lug bolt or nut thread — needed when buying aftermarket fasteners.

Considering a different size?

Run your OE size against the one you want to see diameter change, ground clearance and speedometer error.