Skip to content

2015 Cadillac ATS-L tire and wheel sizes, bolt pattern and tire pressure

Check the tables below for every tire size, wheel size, bolt pattern (PCD), rim offset and tire pressure fitted to the 2015 Cadillac ATS-L.

2015 Cadillac ATS-L tire sizes

Bolt pattern
Fitment tables

2 trims sold in 2015

Open a trim for its factory package and every alternative size, front and rear.

Cadillac ATS-L ATS-L

2014 – 2017 2 trims

ATS-L 2.0T

275 hp · I4 225/40 ZR18 88W / 255/35 ZR18 90W 3 fitments
GenerationATS-L 2014–2017
Power275 hp
EngineI4, Petrol
Center bore70.3 mm
PCD5x115
ThreadM12 x 1.5
Tire sizeRim size and bolt patternPressure, psiPrices
Front225/40 ZR18 88W18x8 ET42 5x11532TiresRims
Rear255/35 ZR18 90W18x9 ET52 5x11535TiresRims
225/45 R17 90V17x8 ET42 5x1152.4TiresRims
225/40 R18 92V18x8 ET42 5x1152.8TiresRims

ATS-L 2.0T

227 hp · I4 225/40 ZR18 88W / 255/35 ZR18 90W 3 fitments
GenerationATS-L 2014–2017
Power227 hp
EngineI4, Petrol
Center bore70.3 mm
PCD5x115
ThreadM12 x 1.5
Tire sizeRim size and bolt patternPressure, psiPrices
Front225/40 ZR18 88W18x8 ET42 5x11532TiresRims
Rear255/35 ZR18 90W18x9 ET52 5x11535TiresRims
225/45 R17 90V17x8 ET42 5x1152.4TiresRims
225/40 R18 92V18x8 ET42 5x1152.8TiresRims
Reading the table

What these columns mean

OE fitment
The package fitted at the factory for that trim.
Alternative
A size the car accepts without modification — plus-sizing, winter setups or optional wheels.
Rim size
Rim diameter × width in inches, and the factory offset (ET) in millimetres, e.g. 18x7.5 ET25.
Bolt pattern (PCD)
Number of studs and the diameter of the circle they sit on. It must match exactly.
Center bore
Diameter of the hub hole. Larger aftermarket bores need hub-centric rings.
Pressure
Recommended cold inflation pressure for that axle, in psi.
Staggered
A wider tire on the rear axle than the front. Front-to-back rotation is not possible.
Thread size
Lug bolt or nut thread — needed when buying aftermarket fasteners.

Considering a different size?

Run your OE size against the one you want to see diameter change, ground clearance and speedometer error.