Skip to content

1991 Cadillac DeVille tire and wheel sizes, bolt pattern and tire pressure

Check the tables below for every tire size, wheel size, bolt pattern (PCD), rim offset and tire pressure fitted to the 1991 Cadillac DeVille.

1991 Cadillac DeVille tire sizes

Bolt pattern
Fitment tables

2 trims sold in 1991

Open a trim for its factory package and every alternative size, front and rear.

Cadillac DeVille C-body IV

1985 – 1993 USA market 2 trims

DeVille 4.5i

174 hp · HT4500 V8 205/70 SR15 5 fitments
GenerationC-body IV 1985–1993
Power174 hp
EngineHT4500 V8, Petrol
Center bore70.3 mm
PCD5x115
ThreadM12 x 1.5
Tire sizeRim size and bolt patternPressure, psiPrices
205/70 SR1515x6 ET53 5x11532TiresRims
215/60 HR1616x6 ET53 5x11532TiresRims
215/60 HR1616x6.5 ET51 5x11532TiresRims
215/55 HR1717x6.5 ET51 5x11535TiresRims
235/50 VR1717x7 ET48 5x11535TiresRims

DeVille 4.9i

201 hp · L26 V8 205/70 SR15 5 fitments
GenerationC-body IV 1985–1993
Power201 hp
EngineL26 V8, Petrol
Center bore70.3 mm
PCD5x115
ThreadM12 x 1.5
Tire sizeRim size and bolt patternPressure, psiPrices
205/70 SR1515x6 ET53 5x11532TiresRims
215/60 HR1616x6 ET53 5x11532TiresRims
215/60 HR1616x6.5 ET51 5x11532TiresRims
215/55 HR1717x6.5 ET51 5x11535TiresRims
235/50 VR1717x7 ET48 5x11535TiresRims
Reading the table

What these columns mean

OE fitment
The package fitted at the factory for that trim.
Alternative
A size the car accepts without modification — plus-sizing, winter setups or optional wheels.
Rim size
Rim diameter × width in inches, and the factory offset (ET) in millimetres, e.g. 18x7.5 ET25.
Bolt pattern (PCD)
Number of studs and the diameter of the circle they sit on. It must match exactly.
Center bore
Diameter of the hub hole. Larger aftermarket bores need hub-centric rings.
Pressure
Recommended cold inflation pressure for that axle, in psi.
Staggered
A wider tire on the rear axle than the front. Front-to-back rotation is not possible.
Thread size
Lug bolt or nut thread — needed when buying aftermarket fasteners.

Considering a different size?

Run your OE size against the one you want to see diameter change, ground clearance and speedometer error.