Skip to content

1979 Cadillac Eldorado tire and wheel sizes, bolt pattern and tire pressure

Check the tables below for every tire size, wheel size, bolt pattern (PCD), rim offset and tire pressure fitted to the 1979 Cadillac Eldorado.

1979 Cadillac Eldorado tire sizes

Bolt pattern
Fitment tables

3 trims sold in 1979

Open a trim for its factory package and every alternative size, front and rear.

Cadillac Eldorado E-body III

1979 – 1985 USA market 3 trims

Eldorado 4.1

125 hp · LC4 V6 205/75 R15 95T 1 fitment
GenerationE-body III 1979–1985
Power125 hp
EngineLC4 V6, Petrol
Center bore70.3 mm
PCD5x120.65
ThreadM12 x 1.5
Tire sizeRim size and bolt patternPressure, psiPrices
205/75 R15 95T15x6 ET10 5x120.6536TiresRims

Eldorado 5.7

160 hp · Rocket 350 V8 205/75 R15 95T 1 fitment
GenerationE-body III 1979–1985
Power160 hp
EngineRocket 350 V8, Petrol
Center bore70.3 mm
PCD5x120.65
ThreadM12 x 1.5
Tire sizeRim size and bolt patternPressure, psiPrices
205/75 R15 95T15x6 ET10 5x120.6536TiresRims

Eldorado 5.7D

119 hp · LF9 V8 205/75 R15 95T 1 fitment
GenerationE-body III 1979–1985
Power119 hp
EngineLF9 V8, Diesel
Center bore70.3 mm
PCD5x120.65
ThreadM12 x 1.5
Tire sizeRim size and bolt patternPressure, psiPrices
205/75 R15 95T15x6 ET10 5x120.6536TiresRims
Reading the table

What these columns mean

OE fitment
The package fitted at the factory for that trim.
Alternative
A size the car accepts without modification — plus-sizing, winter setups or optional wheels.
Rim size
Rim diameter × width in inches, and the factory offset (ET) in millimetres, e.g. 18x7.5 ET25.
Bolt pattern (PCD)
Number of studs and the diameter of the circle they sit on. It must match exactly.
Center bore
Diameter of the hub hole. Larger aftermarket bores need hub-centric rings.
Pressure
Recommended cold inflation pressure for that axle, in psi.
Staggered
A wider tire on the rear axle than the front. Front-to-back rotation is not possible.
Thread size
Lug bolt or nut thread — needed when buying aftermarket fasteners.

Considering a different size?

Run your OE size against the one you want to see diameter change, ground clearance and speedometer error.