Skip to content

2024 Cadillac Escalade-V tire and wheel sizes, bolt pattern and tire pressure

Check the tables below for every tire size, wheel size, bolt pattern (PCD), rim offset and tire pressure fitted to the 2024 Cadillac Escalade-V.

2024 Cadillac Escalade-V tire sizes

Bolt pattern

2 generations were sold in 2024. Check your chassis code before ordering wheels.

Fitment tables

2 trims sold in 2024

Open a trim for its factory package and every alternative size, front and rear. More than one generation was on sale this year — check the chassis code against your VIN before ordering.

Cadillac Escalade-V Facelift

2024 – 2027 1 trim

Escalade-V 6.2 SC Di

682 hp · 6.2 L LT4 V8 Petrol 6.2 L LT4 V8 275/50 R22 1 fitment
GenerationFacelift 2024–2027
MarketUSA
Power682 hp
Engine6.2 L LT4 V8 Petrol 6.2 L LT4 V8, Petrol
Center bore78.1 mm
PCD6x139.7
ThreadM14 x 1.5
FitTire sizeRim size and bolt patternPressure, psiPrices
OE275/50 R2222x9 ET28 6x139.739TiresRims

Cadillac Escalade-V Escalade-V

2022 – 2024 1 trim

Escalade-V 6.2SC Di

682 hp · 6.2 L LT4 V8 Petrol 6.2 L LT4 V8 275/50 R22 1 fitment
GenerationEscalade-V 2022–2024
MarketUSA
Power682 hp
Engine6.2 L LT4 V8 Petrol 6.2 L LT4 V8, Petrol
Center bore78.1 mm
PCD6x139.7
ThreadM14 x 1.5
FitTire sizeRim size and bolt patternPressure, psiPrices
OE275/50 R2222x9 ET28 6x139.739TiresRims
Reading the table

What these columns mean

OE fitment
The package fitted at the factory for that trim.
Alternative
A size the car accepts without modification — plus-sizing, winter setups or optional wheels.
Rim size
Rim diameter × width in inches, and the factory offset (ET) in millimetres, e.g. 18x7.5 ET25.
Bolt pattern (PCD)
Number of studs and the diameter of the circle they sit on. It must match exactly.
Center bore
Diameter of the hub hole. Larger aftermarket bores need hub-centric rings.
Pressure
Recommended cold inflation pressure for that axle, in psi.
Staggered
A wider tire on the rear axle than the front. Front-to-back rotation is not possible.
Thread size
Lug bolt or nut thread — needed when buying aftermarket fasteners.

Considering a different size?

Run your OE size against the one you want to see diameter change, ground clearance and speedometer error.