Skip to content

2006 Cadillac Escalade tire and wheel sizes, bolt pattern and tire pressure

Check the tables below for every tire size, wheel size, bolt pattern (PCD), rim offset and tire pressure fitted to the 2006 Cadillac Escalade.

2006 Cadillac Escalade tire sizes

Bolt pattern
Fitment tables

2 trims sold in 2006

Open a trim for its factory package and every alternative size, front and rear.

Cadillac Escalade GMT800

2002 – 2006 USA market 2 trims

Escalade 5.3i

295 hp · LM7 V8 265/70 R17 112S 5 fitments
GenerationGMT800 2002–2006
Power295 hp
EngineLM7 V8, Petrol
Center bore78.1 mm
PCD6x139.7
ThreadM14 x 1.5
Tire sizeRim size and bolt patternPressure, psiPrices
265/70 R17 112S17x7.5 ET31 6x139.735TiresRims
265/65 R18 112S18x8 ET31 6x139.735TiresRims
285/55 R19 110S19x8.5 ET31 6x139.735TiresRims
275/55 R20 110T20x8.5 ET31 6x139.735TiresRims
285/45 R22 110H22x9 ET31 6x139.735TiresRims

Escalade 6.0i

345 hp · LQ9 V8 265/70 R17 112S 5 fitments
GenerationGMT800 2002–2006
Power345 hp
EngineLQ9 V8, Petrol
Center bore78.1 mm
PCD6x139.7
ThreadM14 x 1.5
Tire sizeRim size and bolt patternPressure, psiPrices
265/70 R17 112S17x7.5 ET31 6x139.735TiresRims
265/65 R18 112S18x8 ET31 6x139.735TiresRims
285/55 R19 110T19x8.5 ET31 6x139.735TiresRims
275/55 R20 110H20x8.5 ET31 6x139.735TiresRims
285/45 R22 110H22x9 ET31 6x139.735TiresRims
Reading the table

What these columns mean

OE fitment
The package fitted at the factory for that trim.
Alternative
A size the car accepts without modification — plus-sizing, winter setups or optional wheels.
Rim size
Rim diameter × width in inches, and the factory offset (ET) in millimetres, e.g. 18x7.5 ET25.
Bolt pattern (PCD)
Number of studs and the diameter of the circle they sit on. It must match exactly.
Center bore
Diameter of the hub hole. Larger aftermarket bores need hub-centric rings.
Pressure
Recommended cold inflation pressure for that axle, in psi.
Staggered
A wider tire on the rear axle than the front. Front-to-back rotation is not possible.
Thread size
Lug bolt or nut thread — needed when buying aftermarket fasteners.

Considering a different size?

Run your OE size against the one you want to see diameter change, ground clearance and speedometer error.