Skip to content

2011 Cadillac Escalade tire and wheel sizes, bolt pattern and tire pressure

Check the tables below for every tire size, wheel size, bolt pattern (PCD), rim offset and tire pressure fitted to the 2011 Cadillac Escalade.

2011 Cadillac Escalade tire sizes

Bolt pattern
Fitment tables

3 trims sold in 2011

Open a trim for its factory package and every alternative size, front and rear.

Cadillac Escalade GMT900

2007 – 2014 USA market 3 trims

Escalade 6.0i

332 hp · 6.0L LZ1 V8 265/65 R18 112S 4 fitments
GenerationGMT900 2007–2014
Power332 hp
Engine6.0L LZ1 V8, Hybrid
Center bore78.1 mm
PCD6x139.7
ThreadM14 x 1.5
Tire sizeRim size and bolt patternPressure, psiPrices
265/65 R18 112S18x8 ET31 6x139.735TiresRims
285/55 R19 110S19x8.5 ET31 6x139.735TiresRims
285/50 R20 110H20x8.5 ET31 6x139.735TiresRims
285/45 R22 110H22x9 ET31 6x139.735TiresRims

Escalade 6.2i

403 hp · 6.2L L92 V8 265/65 R18 112S 4 fitments
GenerationGMT900 2007–2014
Power403 hp
Engine6.2L L92 V8, Petrol
Center bore78.1 mm
PCD6x139.7
ThreadM14 x 1.5
Tire sizeRim size and bolt patternPressure, psiPrices
265/65 R18 112S18x8 ET31 6x139.735TiresRims
285/55 R19 110T19x8.5 ET31 6x139.735TiresRims
275/55 R20 110H20x8.5 ET31 6x139.735TiresRims
285/45 R22 110H22x9 ET31 6x139.735TiresRims

Escalade 6.2i

403 hp · 6.2L L94 V8 Flex-Fuel 265/65 R18 112S 4 fitments
GenerationGMT900 2007–2014
Power403 hp
Engine6.2L L94 V8 Flex-Fuel
Center bore78.1 mm
PCD6x139.7
ThreadM14 x 1.5
Tire sizeRim size and bolt patternPressure, psiPrices
265/65 R18 112S18x8 ET31 6x139.735TiresRims
285/55 R19 110T19x8.5 ET31 6x139.735TiresRims
275/55 R20 110H20x8.5 ET31 6x139.735TiresRims
285/45 R22 110H22x9 ET31 6x139.735TiresRims
Reading the table

What these columns mean

OE fitment
The package fitted at the factory for that trim.
Alternative
A size the car accepts without modification — plus-sizing, winter setups or optional wheels.
Rim size
Rim diameter × width in inches, and the factory offset (ET) in millimetres, e.g. 18x7.5 ET25.
Bolt pattern (PCD)
Number of studs and the diameter of the circle they sit on. It must match exactly.
Center bore
Diameter of the hub hole. Larger aftermarket bores need hub-centric rings.
Pressure
Recommended cold inflation pressure for that axle, in psi.
Staggered
A wider tire on the rear axle than the front. Front-to-back rotation is not possible.
Thread size
Lug bolt or nut thread — needed when buying aftermarket fasteners.

Considering a different size?

Run your OE size against the one you want to see diameter change, ground clearance and speedometer error.