Skip to content

1981 Cadillac Fleetwood Brougham tire and wheel sizes, bolt pattern and tire pressure

Check the tables below for every tire size, wheel size, bolt pattern (PCD), rim offset and tire pressure fitted to the 1981 Cadillac Fleetwood Brougham.

1981 Cadillac Fleetwood Brougham tire sizes

Bolt pattern
Fitment tables

3 trims sold in 1981

Open a trim for its factory package and every alternative size, front and rear.

Cadillac Fleetwood Brougham D-body

1977 – 1986 USA market 3 trims

Fleetwood Brougham 4.1

125 hp · Buick V6 V6 205x R15 99S 4 fitments
GenerationD-body 1977–1986
Power125 hp
EngineBuick V6 V6, Petrol
Center bore78.1 mm
PCD5x127
Thread7/16" - 20 UNF
Tire sizeRim size and bolt patternPressure, psiPrices
205x R15 99S15x6 ET15 5x12732TiresRims
215/75 R15 99S15x6 ET15 5x12732TiresRims
225/75 R15 99S15x6.5 ET10 5x12732TiresRims
235/65 R16 97H16x7 ET0 5x12732TiresRims

Fleetwood Brougham 5.7D

105 hp · LF9 V8 205x R15 99S 4 fitments
GenerationD-body 1977–1986
Power105 hp
EngineLF9 V8, Diesel
Center bore78.1 mm
PCD5x127
Thread7/16" - 20 UNF
Tire sizeRim size and bolt patternPressure, psiPrices
205x R15 99S15x6 ET15 5x12732TiresRims
215/75 R15 99S15x6 ET15 5x12732TiresRims
225/75 R15 99S15x6.5 ET10 5x12732TiresRims
235/65 R16 97H16x7 ET0 5x12732TiresRims

Fleetwood Brougham 6.0

145 hp · L62 V8 205x R15 99S 4 fitments
GenerationD-body 1977–1986
Power145 hp
EngineL62 V8, Petrol
Center bore78.3 mm
PCD5x127
Thread7/16" - 20 UNF
Tire sizeRim size and bolt patternPressure, psiPrices
205x R15 99S15x6 ET15 5x12732TiresRims
215/75 R15 99S15x6 ET15 5x12732TiresRims
225/75 R15 99S15x6.5 ET10 5x12732TiresRims
235/65 R16 97H16x7 ET0 5x12732TiresRims
Reading the table

What these columns mean

OE fitment
The package fitted at the factory for that trim.
Alternative
A size the car accepts without modification — plus-sizing, winter setups or optional wheels.
Rim size
Rim diameter × width in inches, and the factory offset (ET) in millimetres, e.g. 18x7.5 ET25.
Bolt pattern (PCD)
Number of studs and the diameter of the circle they sit on. It must match exactly.
Center bore
Diameter of the hub hole. Larger aftermarket bores need hub-centric rings.
Pressure
Recommended cold inflation pressure for that axle, in psi.
Staggered
A wider tire on the rear axle than the front. Front-to-back rotation is not possible.
Thread size
Lug bolt or nut thread — needed when buying aftermarket fasteners.

Considering a different size?

Run your OE size against the one you want to see diameter change, ground clearance and speedometer error.