Skip to content

2026 Changan-Qiyuan A06 tire and wheel sizes, bolt pattern and tire pressure

Check the tables below for every tire size, wheel size, bolt pattern (PCD), rim offset and tire pressure fitted to the 2026 Changan-Qiyuan A06.

2026 Changan-Qiyuan A06 tire sizes

Bolt pattern
Fitment tables

2 trims sold in 2026

Open a trim for its factory package and every alternative size, front and rear.

Changan-Qiyuan A06 Changan Qiyuan Nevo A06

2025 – 2027 2 trims

A06 1.5 PHEV

161 hp · 1.5 L JL469Q1 TZ180XS002 I4 Hybrid 1.5 L JL469Q1 TZ180XS002 I4 225/55 R18 2 fitments
GenerationChangan Qiyuan Nevo A06 2025–2027
MarketChina
Power161 hp
Engine1.5 L JL469Q1 TZ180XS002 I4 Hybrid 1.5 L JL469Q1 TZ180XS002 I4, Hybrid
Center bore60.1 mm
PCD5x114.3
ThreadM12 x 1.5
FitTire sizeRim size and bolt patternPressure, psiPrices
OE225/55 R1818x7 5x114.338TiresRims
Alt245/45 R1919x8 ET48 5x114.338TiresRims

A06 EV

161 hp · TZ180XS002 Electric TZ180XS002 225/55 R18 2 fitments
GenerationChangan Qiyuan Nevo A06 2025–2027
MarketChina
Power161 hp
EngineTZ180XS002 Electric TZ180XS002, Electric
Center bore60.1 mm
PCD5x114.3
ThreadM12 x 1.5
FitTire sizeRim size and bolt patternPressure, psiPrices
OE225/55 R1818x7 5x114.338TiresRims
Alt245/45 R1919x8 ET48 5x114.338TiresRims
Reading the table

What these columns mean

OE fitment
The package fitted at the factory for that trim.
Alternative
A size the car accepts without modification — plus-sizing, winter setups or optional wheels.
Rim size
Rim diameter × width in inches, and the factory offset (ET) in millimetres, e.g. 18x7.5 ET25.
Bolt pattern (PCD)
Number of studs and the diameter of the circle they sit on. It must match exactly.
Center bore
Diameter of the hub hole. Larger aftermarket bores need hub-centric rings.
Pressure
Recommended cold inflation pressure for that axle, in psi.
Staggered
A wider tire on the rear axle than the front. Front-to-back rotation is not possible.
Thread size
Lug bolt or nut thread — needed when buying aftermarket fasteners.

Considering a different size?

Run your OE size against the one you want to see diameter change, ground clearance and speedometer error.