Skip to content

2024 Chery Arrizo 5 Plus tire and wheel sizes, bolt pattern and tire pressure

Check the tables below for every tire size, wheel size, bolt pattern (PCD), rim offset and tire pressure fitted to the 2024 Chery Arrizo 5 Plus.

2024 Chery Arrizo 5 Plus tire sizes

Bolt pattern
Fitment tables

2 trims sold in 2024

Open a trim for its factory package and every alternative size, front and rear.

Chery Arrizo 5 Plus Arrizo 5 Plus

2021 – 2024 2 trims

Arrizo 5 Plus 1.5i

114 hp · 1.5 L SQRE4G15C I4 Petrol 1.5 L SQRE4G15C I4 205/55 R16 3 fitments
GenerationArrizo 5 Plus 2021–2024
MarketChina
Power114 hp
Engine1.5 L SQRE4G15C I4 Petrol 1.5 L SQRE4G15C I4, Petrol
Center bore65.1 mm
PCD5x108
ThreadM12 x 1.5
FitTire sizeRim size and bolt patternPressure, psiPrices
OE205/55 R1616x6.5 ET47 5x108–TiresRims
Alt195/65 R1515x6 ET46 5x108–TiresRims
Alt205/50 R1717x6.5 ET47 5x108–TiresRims

Arrizo 5 Plus 1.5T

154 hp · 1.5 L SQRE4T15C I4 Petrol 1.5 L SQRE4T15C I4 205/55 R16 3 fitments
GenerationArrizo 5 Plus 2021–2024
MarketChina
Power154 hp
Engine1.5 L SQRE4T15C I4 Petrol 1.5 L SQRE4T15C I4, Petrol
Center bore65.1 mm
PCD5x108
ThreadM12 x 1.5
FitTire sizeRim size and bolt patternPressure, psiPrices
OE205/55 R1616x6.5 ET47 5x10832TiresRims
OE205/50 R1717x6.5 ET47 5x108–TiresRims
Alt205/45 R1818x7 ET45 5x108–TiresRims
Reading the table

What these columns mean

OE fitment
The package fitted at the factory for that trim.
Alternative
A size the car accepts without modification — plus-sizing, winter setups or optional wheels.
Rim size
Rim diameter × width in inches, and the factory offset (ET) in millimetres, e.g. 18x7.5 ET25.
Bolt pattern (PCD)
Number of studs and the diameter of the circle they sit on. It must match exactly.
Center bore
Diameter of the hub hole. Larger aftermarket bores need hub-centric rings.
Pressure
Recommended cold inflation pressure for that axle, in psi.
Staggered
A wider tire on the rear axle than the front. Front-to-back rotation is not possible.
Thread size
Lug bolt or nut thread — needed when buying aftermarket fasteners.

Considering a different size?

Run your OE size against the one you want to see diameter change, ground clearance and speedometer error.