Skip to content

2010 Chery Cowin3 tire and wheel sizes, bolt pattern and tire pressure

Check the tables below for every tire size, wheel size, bolt pattern (PCD), rim offset and tire pressure fitted to the 2010 Chery Cowin3.

2010 Chery Cowin3 tire sizes

Bolt pattern
Other years
Fitment tables

3 trims sold in 2010

Open a trim for its factory package and every alternative size, front and rear.

Chery Cowin3 Cowin3

2010 – 2010 3 trims

Cowin3 1.5i

107 hp · 1.5L SQR477F I4 195/55 R15 2 fitments
GenerationCowin3 2010–2010
Power107 hp
Engine1.5L SQR477F I4, Petrol
Center bore56.5 mm
PCD4x114.3
ThreadM12 x 1.5
Tire sizeRim size and bolt patternPressure, psiPrices
195/55 R1515x6 ET46 4x114.3–TiresRims
185/60 R1414x6 ET38 4x114.3–TiresRims

Cowin3 1.8i

130 hp · 1.8L SQR481FC I4 195/55 R15 2 fitments
GenerationCowin3 2010–2010
Power130 hp
Engine1.8L SQR481FC I4, Petrol
Center bore56.5 mm
PCD4x114.3
ThreadM12 x 1.5
Tire sizeRim size and bolt patternPressure, psiPrices
195/55 R1515x6 ET46 4x114.3–TiresRims
185/60 R1414x6 ET38 4x114.3–TiresRims

Cowin3 2.0i

137 hp · 2.0L SQR484F I4 195/55 R15 2 fitments
GenerationCowin3 2010–2010
Power137 hp
Engine2.0L SQR484F I4, Petrol
Center bore56.5 mm
PCD4x114.3
ThreadM12 x 1.5
Tire sizeRim size and bolt patternPressure, psiPrices
195/55 R1515x6 ET46 4x114.3–TiresRims
185/60 R1414x6 ET38 4x114.3–TiresRims
Reading the table

What these columns mean

OE fitment
The package fitted at the factory for that trim.
Alternative
A size the car accepts without modification — plus-sizing, winter setups or optional wheels.
Rim size
Rim diameter × width in inches, and the factory offset (ET) in millimetres, e.g. 18x7.5 ET25.
Bolt pattern (PCD)
Number of studs and the diameter of the circle they sit on. It must match exactly.
Center bore
Diameter of the hub hole. Larger aftermarket bores need hub-centric rings.
Pressure
Recommended cold inflation pressure for that axle, in psi.
Staggered
A wider tire on the rear axle than the front. Front-to-back rotation is not possible.
Thread size
Lug bolt or nut thread — needed when buying aftermarket fasteners.

Considering a different size?

Run your OE size against the one you want to see diameter change, ground clearance and speedometer error.