2013 Chery iQ tire and wheel sizes, bolt pattern and tire pressure

Check the tables below for every tire size, wheel size, bolt pattern (PCD), rim offset and tire pressure fitted to the 2013 Chery iQ.

2013 Chery iQ tire sizes

155/65R13 175/60R13 165/60R14

Bolt pattern

4x114.3

2 generations were sold in 2013. Check your chassis code before ordering wheels.

Other years

2009 2010 2011 2012 2013 2014 2015 2016 All 2003–2020

Fitment tables

3 trims sold in 2013

Open a trim for its factory package and every alternative size, front and rear. More than one generation was on sale this year — check the chassis code against your VIN before ordering.

Chery iQ II

2013 – 2023 1 trim

iQ 1.0i

68 hp · 1.0L SQR371F I3 165/60 R14 1 fitment

GenerationII 2013–2023

Power68 hp

Engine1.0L SQR371F I3, Petrol

Center bore69.1 mm

PCD4x114.3

ThreadM12 x 1.5

Tire size	Rim size and bolt pattern	Pressure, psi	Prices
165/60 R14	14x5.5 ET45 ~~4x114.3~~	31	Tires Rims

Chery iQ I

2003 – 2013 2 trims

iQ 0.8i

51 hp · I3 155/65 R13 73S 2 fitments

GenerationI 2003–2013

Power51 hp

EngineI3, Petrol

Center bore69.1 mm

PCD4x114.3

ThreadM12 x 1.5

Tire size	Rim size and bolt pattern	Pressure, psi	Prices
155/65 R13 73S	13x5 ET53 ~~4x114.3~~	30	Tires Rims
175/60 R13	13x5 ET53 ~~4x114.3~~	30	Tires Rims

iQ 1.1i

67 hp · I4 155/65 R13 73S 2 fitments

GenerationI 2003–2013

Power67 hp

EngineI4, Petrol

Center bore69.1 mm

PCD4x114.3

ThreadM12 x 1.5

Tire size	Rim size and bolt pattern	Pressure, psi	Prices
155/65 R13 73S	13x5 ET53 ~~4x114.3~~	30	Tires Rims
175/60 R13	13x5 ET53 ~~4x114.3~~	30	Tires Rims

Reading the table

What these columns mean

OE fitment: The package fitted at the factory for that trim.
Alternative: A size the car accepts without modification — plus-sizing, winter setups or optional wheels.
Rim size: Rim diameter × width in inches, and the factory offset (ET) in millimetres, e.g. 18x7.5 ET25.
Bolt pattern (PCD): Number of studs and the diameter of the circle they sit on. It must match exactly.
Center bore: Diameter of the hub hole. Larger aftermarket bores need hub-centric rings.
Pressure: Recommended cold inflation pressure for that axle, in psi.
Staggered: A wider tire on the rear axle than the front. Front-to-back rotation is not possible.
Thread size: Lug bolt or nut thread — needed when buying aftermarket fasteners.