Skip to content

2006 Chery QQ tire and wheel sizes, bolt pattern and tire pressure

Check the tables below for every tire size, wheel size, bolt pattern (PCD), rim offset and tire pressure fitted to the 2006 Chery QQ.

2006 Chery QQ tire sizes

Bolt pattern
Fitment tables

3 trims sold in 2006

Open a trim for its factory package and every alternative size, front and rear.

Chery QQ I

2003 – 2013 3 trims

QQ 0.8i

51 hp · 0.8L SQR372 I3 155/65 R13 73S 2 fitments
GenerationI 2003–2013
MarketEurope
Power51 hp
Engine0.8L SQR372 I3, Petrol
Center bore69.1 mm
PCD4x114.3
ThreadM12 x 1.5
Tire sizeRim size and bolt patternPressure, psiPrices
155/65 R13 73S13x5 ET53 4x114.330TiresRims
175/60 R1313x5 ET53 4x114.330TiresRims

QQ 1.1i

67 hp · 1.1L I4 155/65 R13 73S 2 fitments
GenerationI 2003–2013
MarketEurope
Power67 hp
Engine1.1L I4, Petrol
Center bore69.1 mm
PCD4x114.3
ThreadM12 x 1.5
Tire sizeRim size and bolt patternPressure, psiPrices
155/65 R13 73S13x5 ET53 4x114.330TiresRims
175/60 R1313x5 ET53 4x114.330TiresRims

QQ 1.1i

63 hp · 1.1L I4 155/65 R13 73S 2 fitments
GenerationI 2003–2013
MarketMiddle East
Power63 hp
Engine1.1L I4, Petrol
Center bore69.1 mm
PCD4x114.3
ThreadM12 x 1.5
Tire sizeRim size and bolt patternPressure, psiPrices
155/65 R13 73S13x5 ET53 4x114.330TiresRims
175/60 R1313x5 ET53 4x114.330TiresRims
Reading the table

What these columns mean

OE fitment
The package fitted at the factory for that trim.
Alternative
A size the car accepts without modification — plus-sizing, winter setups or optional wheels.
Rim size
Rim diameter × width in inches, and the factory offset (ET) in millimetres, e.g. 18x7.5 ET25.
Bolt pattern (PCD)
Number of studs and the diameter of the circle they sit on. It must match exactly.
Center bore
Diameter of the hub hole. Larger aftermarket bores need hub-centric rings.
Pressure
Recommended cold inflation pressure for that axle, in psi.
Staggered
A wider tire on the rear axle than the front. Front-to-back rotation is not possible.
Thread size
Lug bolt or nut thread — needed when buying aftermarket fasteners.

Considering a different size?

Run your OE size against the one you want to see diameter change, ground clearance and speedometer error.