Skip to content
tirewheelguide.com

2006 Chery QQ6 tire and wheel sizes, bolt pattern and tire pressure

Check the tables below for every tire size, wheel size, bolt pattern (PCD), rim offset and tire pressure fitted to the 2006 Chery QQ6.

2006 Chery QQ6 tire sizes

175/60R14165/65R14
Bolt pattern
Other years
20062007200820092010 All 2006–2010
Fitment tables

4 trims sold in 2006

Open a trim for its factory package and every alternative size, front and rear.

Chery QQ6 QQ6

2006 – 2010 4 trims

QQ6 1.1i

67 hp · 1.1L I4 175/60 R14 2 fitments
GenerationQQ6 2006–2010
MarketEurope
Power67 hp
Engine1.1L I4, Petrol
Center bore56.1 mm
PCD4x100
ThreadM12 x 1.25
Tire sizeRim size and bolt patternPressure, psiPrices
175/60 R1414x5 ET46 4x100–TiresRims
165/65 R1414x5 ET46 4x100–TiresRims

QQ6 1.1i

67 hp · CAC472 I4 175/60 R14 1 fitment
GenerationQQ6 2006–2010
MarketChina
Power67 hp
EngineCAC472 I4, Petrol
Center bore56.1 mm
PCD4x100
ThreadM12 x 1.5
Tire sizeRim size and bolt patternPressure, psiPrices
175/60 R1414x5 ET46 4x100–TiresRims

QQ6 1.3i

82 hp · 1.3L I4 175/60 R14 2 fitments
GenerationQQ6 2006–2010
MarketEurope
Power82 hp
Engine1.3L I4, Petrol
Center bore56.1 mm
PCD4x100
ThreadM12 x 1.25
Tire sizeRim size and bolt patternPressure, psiPrices
175/60 R1414x5 ET46 4x100–TiresRims
165/65 R1414x5 ET46 4x100–TiresRims

QQ6 1.3i

82 hp · SQR473F I4 175/60 R14 1 fitment
GenerationQQ6 2006–2010
MarketChina
Power82 hp
EngineSQR473F I4, Petrol
Center bore56.1 mm
PCD4x100
ThreadM12 x 1.5
Tire sizeRim size and bolt patternPressure, psiPrices
175/60 R1414x5 ET46 4x100–TiresRims
Reading the table

What these columns mean

OE fitment
The package fitted at the factory for that trim.
Alternative
A size the car accepts without modification — plus-sizing, winter setups or optional wheels.
Rim size
Rim diameter × width in inches, and the factory offset (ET) in millimetres, e.g. 18x7.5 ET25.
Bolt pattern (PCD)
Number of studs and the diameter of the circle they sit on. It must match exactly.
Center bore
Diameter of the hub hole. Larger aftermarket bores need hub-centric rings.
Pressure
Recommended cold inflation pressure for that axle, in psi.
Staggered
A wider tire on the rear axle than the front. Front-to-back rotation is not possible.
Thread size
Lug bolt or nut thread — needed when buying aftermarket fasteners.

Considering a different size?

Run your OE size against the one you want to see diameter change, ground clearance and speedometer error.

Open the size calculator
Recent articles

Guides worth reading first

All articles
Basics

How to read a tire sidewall

Reading a tire sidewall is easy. Find out what the size, load index, speed rating and date code mean.

Continue reading
Guide

Everything you need to know about tire tread depth

Tire tread depth is an important factor in keeping your vehicle safe — how to measure it and when to replace.

Continue reading
Gear

Best supercapacitor jump starter review

We tested seven supercapacitor jump starters to find the ones worth buying.

Continue reading