Skip to content

2017 Chery Tiggo 3 tire and wheel sizes, bolt pattern and tire pressure

Check the tables below for every tire size, wheel size, bolt pattern (PCD), rim offset and tire pressure fitted to the 2017 Chery Tiggo 3.

2017 Chery Tiggo 3 tire sizes

Bolt patterns
5x108
Tiggo 3
5x114.3
Tiggo 3
Fitment tables

3 trims sold in 2017

Open a trim for its factory package and every alternative size, front and rear.

Chery Tiggo 3 Tiggo 3

2020 – 2023 Latin America market 3 trims

Tiggo 3 1.6i

125 hp · 1.6L SQRE4G16 I4 215/60 R17 1 fitment
GenerationTiggo 3 2020–2023
MarketEurope
Power125 hp
Engine1.6L SQRE4G16 I4, Petrol
Center bore60.1 mm
PCD5x108
ThreadM12 x 1.5
Tire sizeRim size and bolt patternPressure, psiPrices
215/60 R1717x7 ET45 5x10829TiresRims

Tiggo 3 1.6i

125 hp · SQRE4G16 I4 215/60 R17 2 fitments
GenerationTiggo 3 2020–2023
MarketLatin America
Power125 hp
EngineSQRE4G16 I4, Petrol
Center bore60.1 mm
PCD5x114.3
ThreadM12 x 1.5
Tire sizeRim size and bolt patternPressure, psiPrices
215/60 R1717x7 ET45 5x114.329TiresRims
215/65 R1616x7 ET45 5x114.329TiresRims

Tiggo 3 2.0i

134 hp · 2.0L I4 215/60 R17 1 fitment
GenerationTiggo 3 2020–2023
MarketMiddle East
Power134 hp
Engine2.0L I4, Petrol
Center bore60.1 mm
PCD5x108
ThreadM12 x 1.5
Tire sizeRim size and bolt patternPressure, psiPrices
215/60 R1717x7 ET45 5x108–TiresRims
Reading the table

What these columns mean

OE fitment
The package fitted at the factory for that trim.
Alternative
A size the car accepts without modification — plus-sizing, winter setups or optional wheels.
Rim size
Rim diameter × width in inches, and the factory offset (ET) in millimetres, e.g. 18x7.5 ET25.
Bolt pattern (PCD)
Number of studs and the diameter of the circle they sit on. It must match exactly.
Center bore
Diameter of the hub hole. Larger aftermarket bores need hub-centric rings.
Pressure
Recommended cold inflation pressure for that axle, in psi.
Staggered
A wider tire on the rear axle than the front. Front-to-back rotation is not possible.
Thread size
Lug bolt or nut thread — needed when buying aftermarket fasteners.

Considering a different size?

Run your OE size against the one you want to see diameter change, ground clearance and speedometer error.