2010 Chevrolet Beat tire and wheel sizes, bolt pattern and tire pressure

Check the tables below for every tire size, wheel size, bolt pattern (PCD), rim offset and tire pressure fitted to the 2010 Chevrolet Beat.

2010 Chevrolet Beat tire sizes

Bolt pattern

Other years

Fitment tables

Open a trim for its factory package and every alternative size, front and rear.

2010 – 2013 Southeast Asia market 1 trim

79 hp · I4 Petrol-Natural 155/70 R14 77T 4 fitments

GenerationM300 2010–2013

Power79 hp

EngineI4 Petrol-Natural, Gas

Center bore56.6 mm

PCD4x100

ThreadM12 x 1.5

Tire size	Rim size and bolt pattern	Pressure, psi	Prices
155/70 R14 77T	14x4.5 ET43.5 ~~4x100~~	32	Tires Rims
155/80 R13 79T	13x4.5 ET45 ~~4x100~~	32	Tires Rims
165/65 R14 79T	14x4.5 ET43.5 ~~4x100~~	33	Tires Rims
165/60 R15 77T	15x5 ET45 ~~4x100~~	32	Tires Rims

Reading the table

OE fitment: The package fitted at the factory for that trim.
Alternative: A size the car accepts without modification — plus-sizing, winter setups or optional wheels.
Rim size: Rim diameter × width in inches, and the factory offset (ET) in millimetres, e.g. 18x7.5 ET25.
Bolt pattern (PCD): Number of studs and the diameter of the circle they sit on. It must match exactly.
Center bore: Diameter of the hub hole. Larger aftermarket bores need hub-centric rings.
Pressure: Recommended cold inflation pressure for that axle, in psi.
Staggered: A wider tire on the rear axle than the front. Front-to-back rotation is not possible.
Thread size: Lug bolt or nut thread — needed when buying aftermarket fasteners.