Skip to content

2023 Chevrolet Blazer tire and wheel sizes, bolt pattern and tire pressure

Check the tables below for every tire size, wheel size, bolt pattern (PCD), rim offset and tire pressure fitted to the 2023 Chevrolet Blazer.

2023 Chevrolet Blazer tire sizes

Bolt pattern
Fitment tables

2 trims sold in 2023

Open a trim for its factory package and every alternative size, front and rear.

Chevrolet Blazer C1XX Facelift

2023 – 2027 2 trims

Blazer 2.0T (SUV, 5d)

228 hp · 2.0 L LSY I4 Petrol 2.0 L LSY I4 235/65 R18 4 fitments
GenerationC1XX Facelift 2023–2027
MarketUSA
Power228 hp
Engine2.0 L LSY I4 Petrol 2.0 L LSY I4, Petrol
Center bore66.9 mm
PCD6x120
ThreadM14 x 1.5
FitTire sizeRim size and bolt patternPressure, psiPrices
OE235/65 R1818x8 ET50 6x12035TiresRims
OE235/55 R2020x8 ET50 6x12036TiresRims
Alt235/60 R1919x8 ET50 6x12035TiresRims
Alt265/45 R2121x8.5 ET55 6x12036TiresRims

Blazer 3.6i (SUV, 5d)

308 hp · 3.6 L LGX V6 Petrol 3.6 L LGX V6 235/55 R20 4 fitments
GenerationC1XX Facelift 2023–2027
MarketUSA
Power308 hp
Engine3.6 L LGX V6 Petrol 3.6 L LGX V6, Petrol
Center bore66.9 mm
PCD6x120
ThreadM14 x 1.5
FitTire sizeRim size and bolt patternPressure, psiPrices
OE235/55 R2020x8 ET50 6x12036TiresRims
OE265/45 R2121x8.5 ET55 6x12036TiresRims
Alt235/65 R1818x8 ET50 6x12035TiresRims
Alt235/60 R1919x8 ET50 6x12035TiresRims
Reading the table

What these columns mean

OE fitment
The package fitted at the factory for that trim.
Alternative
A size the car accepts without modification — plus-sizing, winter setups or optional wheels.
Rim size
Rim diameter × width in inches, and the factory offset (ET) in millimetres, e.g. 18x7.5 ET25.
Bolt pattern (PCD)
Number of studs and the diameter of the circle they sit on. It must match exactly.
Center bore
Diameter of the hub hole. Larger aftermarket bores need hub-centric rings.
Pressure
Recommended cold inflation pressure for that axle, in psi.
Staggered
A wider tire on the rear axle than the front. Front-to-back rotation is not possible.
Thread size
Lug bolt or nut thread — needed when buying aftermarket fasteners.

Considering a different size?

Run your OE size against the one you want to see diameter change, ground clearance and speedometer error.