Skip to content

1974 Chevrolet Camaro tire and wheel sizes, bolt pattern and tire pressure

Check the tables below for every tire size, wheel size, bolt pattern (PCD), rim offset and tire pressure fitted to the 1974 Chevrolet Camaro.

1974 Chevrolet Camaro tire sizes

Bolt pattern
Fitment tables

5 trims sold in 1974

Open a trim for its factory package and every alternative size, front and rear.

Chevrolet Camaro II

1970 – 1981 5 trims

Camaro 4.1 250cid

110 hp · I6 205/75 R14 2 fitments
GenerationII 1970–1981
Power110 hp
EngineI6, Petrol
Center bore70.3 mm
PCD5x120.65
Thread7/16" - 20 UNF
Tire sizeRim size and bolt patternPressure, psiPrices
205/75 R1414x6.5 ET0 5x120.65–TiresRims
235/60 R1515x7.5 ET0 5x120.65–TiresRims

Camaro 5.7 350cid

160 hp · LM1 V8 205/75 R14 2 fitments
GenerationII 1970–1981
Power160 hp
EngineLM1 V8, Petrol
Center bore70.3 mm
PCD5x120.65
Thread7/16" - 20 UNF
Tire sizeRim size and bolt patternPressure, psiPrices
205/75 R1414x6.5 ET0 5x120.65–TiresRims
235/60 R1515x7.5 ET0 5x120.65–TiresRims

Camaro 5.7 350cid

185 hp · L48 V8 205/75 R14 2 fitments
GenerationII 1970–1981
Power185 hp
EngineL48 V8, Petrol
Center bore70.3 mm
PCD5x120.65
Thread7/16" - 20 UNF
Tire sizeRim size and bolt patternPressure, psiPrices
205/75 R1414x6.5 ET0 5x120.65–TiresRims
235/60 R1515x7.5 ET0 5x120.65–TiresRims

Camaro 5.7 350cid

145 hp · L65 V8 205/75 R14 2 fitments
GenerationII 1970–1981
Power145 hp
EngineL65 V8, Petrol
Center bore70.3 mm
PCD5x120.65
Thread7/16" - 20 UNF
Tire sizeRim size and bolt patternPressure, psiPrices
205/75 R1414x6.5 ET0 5x120.65–TiresRims
235/60 R1515x7.5 ET0 5x120.65–TiresRims

Camaro 5.7 350cid Z28

245 hp · V8 205/75 R14 2 fitments
GenerationII 1970–1981
Power245 hp
EngineV8, Petrol
Center bore70.3 mm
PCD5x120.65
Thread7/16" - 20 UNF
Tire sizeRim size and bolt patternPressure, psiPrices
205/75 R1414x6.5 ET0 5x120.65–TiresRims
235/60 R1515x7.5 ET0 5x120.65–TiresRims
Reading the table

What these columns mean

OE fitment
The package fitted at the factory for that trim.
Alternative
A size the car accepts without modification — plus-sizing, winter setups or optional wheels.
Rim size
Rim diameter × width in inches, and the factory offset (ET) in millimetres, e.g. 18x7.5 ET25.
Bolt pattern (PCD)
Number of studs and the diameter of the circle they sit on. It must match exactly.
Center bore
Diameter of the hub hole. Larger aftermarket bores need hub-centric rings.
Pressure
Recommended cold inflation pressure for that axle, in psi.
Staggered
A wider tire on the rear axle than the front. Front-to-back rotation is not possible.
Thread size
Lug bolt or nut thread — needed when buying aftermarket fasteners.

Considering a different size?

Run your OE size against the one you want to see diameter change, ground clearance and speedometer error.