Skip to content

2009 Chevrolet Captiva tire and wheel sizes, bolt pattern and tire pressure

Check the tables below for every tire size, wheel size, bolt pattern (PCD), rim offset and tire pressure fitted to the 2009 Chevrolet Captiva.

Bolt pattern
Fitment tables

3 trims sold in 2009

Open a trim for its factory package and every alternative size, front and rear.

Chevrolet Captiva I

2006 – 2011 3 trims

Captiva 2.0D

148 hp · 2.0L I4 215/70 R16 100T 6 fitments
GenerationI 2006–2011
Power148 hp
Engine2.0L I4, Diesel
Center bore70.2 mm
PCD5x115
ThreadM12 x 1.5
Tire sizeRim size and bolt patternPressure, psiPrices
215/70 R16 100T16x6.5 ET46 5x11535TiresRims
235/60 R17 102H17x7 ET46 5x11535TiresRims
235/65 R17 104H17x7 ET46 5x11535TiresRims
235/55 R18 100H18x7 ET45 5x11535TiresRims
235/55 R19 101H19x7 ET45 5x11535TiresRims
235/50 R19 99V19x7 ET45 5x11535TiresRims

Captiva 2.4i

134 hp · 2.4L Z24SED I4 215/70 R16 100T 6 fitments
GenerationI 2006–2011
Power134 hp
Engine2.4L Z24SED I4, Petrol
Center bore70.2 mm
PCD5x115
ThreadM12 x 1.5
Tire sizeRim size and bolt patternPressure, psiPrices
215/70 R16 100T16x6.5 ET46 5x11535TiresRims
235/60 R17 102H17x7 ET46 5x11535TiresRims
235/65 R17 104H17x7 ET46 5x11535TiresRims
235/55 R18 100H18x7 ET45 5x11535TiresRims
235/55 R19 101H19x7 ET45 5x11535TiresRims
235/50 R19 99V19x7 ET45 5x11535TiresRims

Captiva 3.2i

227 hp · 3.2L 10HM V6 235/55 R18 100H 6 fitments
GenerationI 2006–2011
Power227 hp
Engine3.2L 10HM V6, Petrol
Center bore70.2 mm
PCD5x115
ThreadM12 x 1.5
Tire sizeRim size and bolt patternPressure, psiPrices
235/55 R18 100H18x7 ET45 5x11535TiresRims
235/60 R17 102H17x7 ET46 5x11535TiresRims
235/65 R17 104H17x7 ET46 5x11535TiresRims
235/55 R19 101H19x7 ET45 5x11535TiresRims
235/50 R19 99V19x7 ET45 5x11535TiresRims
245/45 R20 99V20x8 ET45 5x11535TiresRims
Reading the table

What these columns mean

OE fitment
The package fitted at the factory for that trim.
Alternative
A size the car accepts without modification — plus-sizing, winter setups or optional wheels.
Rim size
Rim diameter × width in inches, and the factory offset (ET) in millimetres, e.g. 18x7.5 ET25.
Bolt pattern (PCD)
Number of studs and the diameter of the circle they sit on. It must match exactly.
Center bore
Diameter of the hub hole. Larger aftermarket bores need hub-centric rings.
Pressure
Recommended cold inflation pressure for that axle, in psi.
Staggered
A wider tire on the rear axle than the front. Front-to-back rotation is not possible.
Thread size
Lug bolt or nut thread — needed when buying aftermarket fasteners.

Considering a different size?

Run your OE size against the one you want to see diameter change, ground clearance and speedometer error.