Skip to content

2009 Chevrolet Cobalt tire and wheel sizes, bolt pattern and tire pressure

Check the tables below for every tire size, wheel size, bolt pattern (PCD), rim offset and tire pressure fitted to the 2009 Chevrolet Cobalt.

2009 Chevrolet Cobalt tire sizes

Bolt patterns
Fitment tables

3 trims sold in 2009

Open a trim for its factory package and every alternative size, front and rear.

Chevrolet Cobalt I

2005 – 2010 3 trims

Cobalt 2.0 SS

260 hp · I4 225/40 ZR18 92Y 1 fitment
GenerationI 2005–2010
Power260 hp
EngineI4, Petrol
Center bore65.1 mm
PCD5x110
ThreadM12 x 1.5
Tire sizeRim size and bolt patternPressure, psiPrices
225/40 ZR18 92Y18x7.5 ET42 5x11032TiresRims

Cobalt 2.2

155 hp · I4 195/65 R15 89S 2 fitments
GenerationI 2005–2010
Power155 hp
EngineI4, Petrol
Center bore57.1 mm
PCD4x100
ThreadM12 x 1.5
Tire sizeRim size and bolt patternPressure, psiPrices
195/65 R15 89S15x6 ET42 4x10030TiresRims
205/55 R16 89H16x6 ET42 4x10030TiresRims

Cobalt 2.2 2LT

155 hp · I4 205/55 R16 89H 2 fitments
GenerationI 2005–2010
Power155 hp
EngineI4, Petrol
Center bore65.1 mm
PCD5x110
ThreadM12 x 1.5
Tire sizeRim size and bolt patternPressure, psiPrices
205/55 R16 89H16x6 ET42 5x11030TiresRims
205/50 R17 90H17x7 ET42 5x11035TiresRims
Reading the table

What these columns mean

OE fitment
The package fitted at the factory for that trim.
Alternative
A size the car accepts without modification — plus-sizing, winter setups or optional wheels.
Rim size
Rim diameter × width in inches, and the factory offset (ET) in millimetres, e.g. 18x7.5 ET25.
Bolt pattern (PCD)
Number of studs and the diameter of the circle they sit on. It must match exactly.
Center bore
Diameter of the hub hole. Larger aftermarket bores need hub-centric rings.
Pressure
Recommended cold inflation pressure for that axle, in psi.
Staggered
A wider tire on the rear axle than the front. Front-to-back rotation is not possible.
Thread size
Lug bolt or nut thread — needed when buying aftermarket fasteners.

Considering a different size?

Run your OE size against the one you want to see diameter change, ground clearance and speedometer error.