Skip to content

2026 Chevrolet Colorado tire and wheel sizes, bolt pattern and tire pressure

Check the tables below for every tire size, wheel size, bolt pattern (PCD), rim offset and tire pressure fitted to the 2026 Chevrolet Colorado.

Bolt pattern

2 generations were sold in 2026. Check your chassis code before ordering wheels.

Fitment tables

2 trims sold in 2026

Open a trim for its factory package and every alternative size, front and rear. More than one generation was on sale this year — check the chassis code against your VIN before ordering.

Chevrolet Colorado II (GMT 31XX) Facelift

2024 – 2027 1 trim

Colorado 2.8TD

204 hp · 2.8 L LWN I4 Diesel 2.8 L LWN I4 245/70 R16 3 fitments
GenerationII (GMT 31XX) Facelift 2024–2027
MarketLatin America
Power204 hp
Engine2.8 L LWN I4 Diesel 2.8 L LWN I4, Diesel
Center bore100.3 mm
PCD6x139.7
ThreadM12 x 1.5
FitTire sizeRim size and bolt patternPressure, psiPrices
OE245/70 R1616x6.5 ET33 6x139.735TiresRims
Alt255/65 R1717x7 ET33 6x139.735TiresRims
Alt265/60 R1818x7.5 ET33 6x139.735TiresRims

Chevrolet Colorado III (GMT 31XX-2)

2023 – 2027 1 trim

Colorado 2.7 TurboMax

310 hp · 2.7 L L3B I4 Petrol 2.7 L L3B I4 265/70 R17 8 fitments
GenerationIII (GMT 31XX-2) 2023–2027
MarketUSA
Power310 hp
Engine2.7 L L3B I4 Petrol 2.7 L L3B I4, Petrol
Center bore78.1 mm
PCD6x139.7
ThreadM14 x 1.5
FitTire sizeRim size and bolt patternPressure, psiPrices
OE265/70 R1717x8 ET24 6x139.7–TiresRims
OE265/65 R1818x8.5 ET26 6x139.7–TiresRims
OE275/60 R2020x9 ET28 6x139.7–TiresRims
Alt285/70 R1717x8 ET24 6x139.7–TiresRims
Alt315/70 R1717x8 ET24 6x139.7–TiresRims
Alt275/65 R1818x8.5 ET26 6x139.7–TiresRims
Alt255/55 R2020x9 ET28 6x139.7–TiresRims
Alt275/50 R2222x9 ET28 6x139.7–TiresRims
Reading the table

What these columns mean

OE fitment
The package fitted at the factory for that trim.
Alternative
A size the car accepts without modification — plus-sizing, winter setups or optional wheels.
Rim size
Rim diameter × width in inches, and the factory offset (ET) in millimetres, e.g. 18x7.5 ET25.
Bolt pattern (PCD)
Number of studs and the diameter of the circle they sit on. It must match exactly.
Center bore
Diameter of the hub hole. Larger aftermarket bores need hub-centric rings.
Pressure
Recommended cold inflation pressure for that axle, in psi.
Staggered
A wider tire on the rear axle than the front. Front-to-back rotation is not possible.
Thread size
Lug bolt or nut thread — needed when buying aftermarket fasteners.

Considering a different size?

Run your OE size against the one you want to see diameter change, ground clearance and speedometer error.