1963 Chevrolet Corvair tire and wheel sizes, bolt pattern and tire pressure

Check the tables below for every tire size, wheel size, bolt pattern (PCD), rim offset and tire pressure fitted to the 1963 Chevrolet Corvair.

1963 Chevrolet Corvair tire sizes

175/80R13 185/70R14

Bolt pattern

Other years

Fitment tables

Open a trim for its factory package and every alternative size, front and rear.

1960 – 1964 3 trims

80 hp · 2.4L F6 6.50x D13 4 fitments

GenerationI 1960–1964

Power80 hp

Engine2.4L F6, Petrol

Center bore66.7 mm

PCD4x114.3

Thread7/16" - 20 UNF

Tire size	Rim size and bolt pattern	Pressure, psi	Prices
6.50x D13	13x5.5 ET25.4 ~~4x114.3~~	1.8	Tires Rims
7.00x D13	13x5.5 ET25.4 ~~4x114.3~~	1.8	Tires Rims
175/80 R13	13x5.5 ET25.4 ~~4x114.3~~	2	Tires Rims
185/70 R14	14x5.5 ET25 ~~4x114.3~~	2	Tires Rims

102 hp · 2.4L F6 6.50x D13 4 fitments

GenerationI 1960–1964

Power102 hp

Engine2.4L F6, Petrol

Center bore66.7 mm

PCD4x114.3

Thread7/16" - 20 UNF

Tire size	Rim size and bolt pattern	Pressure, psi	Prices
6.50x D13	13x5.5 ET25.4 ~~4x114.3~~	1.8	Tires Rims
7.00x D13	13x5.5 ET25.4 ~~4x114.3~~	1.8	Tires Rims
175/80 R13	13x5.5 ET25.4 ~~4x114.3~~	2	Tires Rims
185/70 R14	14x5.5 ET25 ~~4x114.3~~	2	Tires Rims

150 hp · 2.4L F6 6.50x D13 4 fitments

GenerationI 1960–1964

Power150 hp

Engine2.4L F6, Petrol

Center bore66.7 mm

PCD4x114.3

Thread7/16" - 20 UNF

Tire size	Rim size and bolt pattern	Pressure, psi	Prices
6.50x D13	13x5.5 ET25.4 ~~4x114.3~~	1.8	Tires Rims
7.00x D13	13x5.5 ET25.4 ~~4x114.3~~	1.8	Tires Rims
175/80 R13	13x5.5 ET25.4 ~~4x114.3~~	2	Tires Rims
185/70 R14	14x5.5 ET25 ~~4x114.3~~	2	Tires Rims

Reading the table

OE fitment: The package fitted at the factory for that trim.
Alternative: A size the car accepts without modification — plus-sizing, winter setups or optional wheels.
Rim size: Rim diameter × width in inches, and the factory offset (ET) in millimetres, e.g. 18x7.5 ET25.
Bolt pattern (PCD): Number of studs and the diameter of the circle they sit on. It must match exactly.
Center bore: Diameter of the hub hole. Larger aftermarket bores need hub-centric rings.
Pressure: Recommended cold inflation pressure for that axle, in psi.
Staggered: A wider tire on the rear axle than the front. Front-to-back rotation is not possible.
Thread size: Lug bolt or nut thread — needed when buying aftermarket fasteners.