Skip to content

2009 Chevrolet Corvette tire and wheel sizes, bolt pattern and tire pressure

Check the tables below for every tire size, wheel size, bolt pattern (PCD), rim offset and tire pressure fitted to the 2009 Chevrolet Corvette.

Fitment tables

4 trims sold in 2009

Open a trim for its factory package and every alternative size, front and rear.

Chevrolet Corvette C6

2005 – 2013 4 trims

Corvette 6.2

430 hp · 6.2L LS3 V8 245/40 ZR18 88Y / 285/35 ZR19 90Y 3 fitments
GenerationC6 2005–2013
Power430 hp
Engine6.2L LS3 V8, Petrol
Center bore70.3 mm
PCD5x120.65
ThreadM12 x 1.5
Tire sizeRim size and bolt patternPressure, psiPrices
Front245/40 ZR18 88Y18x8.5 ET56 5x120.6530TiresRims
Rear285/35 ZR19 90Y19x10 ET79 5x120.6530TiresRims
Front275/35 ZR18 87Y18x9.5 ET40 5x120.6530TiresRims
Rear325/30 ZR19 94Y19x12 ET59 5x120.6530TiresRims
Front285/30 R1919x10 ET40 5x120.6530TiresRims
Rear335/25 R2020x12 ET59 5x120.6530TiresRims

Corvette 7.0i

506 hp · 7.0L V8 245/35 R19 / 285/35 R19 2 fitments
GenerationC6 2005–2013
Power506 hp
Engine7.0L V8, Petrol
Center bore70.3 mm
PCD5x120.65
ThreadM12 x 1.5
Tire sizeRim size and bolt patternPressure, psiPrices
Front245/35 R1919x8 ET54 5x120.65–TiresRims
Rear285/35 R1919x10 ET59 5x120.65–TiresRims
Front255/30 R2020x9 ET40 5x120.65–TiresRims
Rear305/30 R2020x11 ET50 5x120.65–TiresRims

Corvette Z06 7.0

505 hp · LS7 V8 275/35 ZR18 87Y 1 fitment
GenerationC6 2005–2013
Power505 hp
EngineLS7 V8, Petrol
Center bore70.3 mm
PCD5x120.65
ThreadM12 x 1.5
Tire sizeRim size and bolt patternPressure, psiPrices
275/35 ZR18 87Y19x12 ET59 5x120.6530TiresRims

Corvette ZR1 6.2 Supercharged

638 hp · 6.2L LS9 V8 285/30 R19 1 fitment
GenerationC6 2005–2013
Power638 hp
Engine6.2L LS9 V8, Petrol
Center bore70.3 mm
PCD5x120.65
ThreadM12 x 1.5
Tire sizeRim size and bolt patternPressure, psiPrices
285/30 R1920x12 ET59 5x120.65–TiresRims
Reading the table

What these columns mean

OE fitment
The package fitted at the factory for that trim.
Alternative
A size the car accepts without modification — plus-sizing, winter setups or optional wheels.
Rim size
Rim diameter × width in inches, and the factory offset (ET) in millimetres, e.g. 18x7.5 ET25.
Bolt pattern (PCD)
Number of studs and the diameter of the circle they sit on. It must match exactly.
Center bore
Diameter of the hub hole. Larger aftermarket bores need hub-centric rings.
Pressure
Recommended cold inflation pressure for that axle, in psi.
Staggered
A wider tire on the rear axle than the front. Front-to-back rotation is not possible.
Thread size
Lug bolt or nut thread — needed when buying aftermarket fasteners.

Considering a different size?

Run your OE size against the one you want to see diameter change, ground clearance and speedometer error.