Skip to content

2022 Chevrolet Corvette tire and wheel sizes, bolt pattern and tire pressure

Check the tables below for every tire size, wheel size, bolt pattern (PCD), rim offset and tire pressure fitted to the 2022 Chevrolet Corvette.

2022 Chevrolet Corvette tire sizes

Bolt pattern
Fitment tables

3 trims sold in 2022

Open a trim for its factory package and every alternative size, front and rear.

Chevrolet Corvette C8

2020 – 2027 3 trims

Corvette 6.2 Stingray

490 hp · 6.2L LT2 V8 245/35 ZR19 89Y / 305/30 ZR20 95Y 2 fitments
GenerationC8 2020–2027
MarketUSA
Power490 hp
Engine6.2L LT2 V8, Petrol
Center bore66.9 mm
PCD5x120
ThreadM14 x 1.5
Tire sizeRim size and bolt patternPressure, psiPrices
Front245/35 ZR19 89Y19x8.5 ET52 5x120–TiresRims
Rear305/30 ZR20 95Y20x11 ET64 5x120–TiresRims
Front285/30 ZR19 94Y19x10 ET43 5x120–TiresRims
Rear325/25 ZR20 99Y20x12 ET59 5x120–TiresRims

Corvette 6.2 Stingray

495 hp · 6.2L LT2 V8 245/35 ZR19 89Y / 305/30 ZR20 95Y 2 fitments
GenerationC8 2020–2027
MarketUSA
Power495 hp
Engine6.2L LT2 V8, Petrol
Center bore66.9 mm
PCD5x120
ThreadM14 x 1.5
Tire sizeRim size and bolt patternPressure, psiPrices
Front245/35 ZR19 89Y19x8.5 ET52 5x120–TiresRims
Rear305/30 ZR20 95Y20x11 ET64 5x120–TiresRims
Front285/30 ZR19 94Y19x10 ET43 5x120–TiresRims
Rear325/25 ZR20 99Y20x12 ET59 5x120–TiresRims

Corvette 6.2 Stingray (7BA-Y2XC)

495 hp · 6.2L LT2 V8 245/35 ZR19 89Y / 305/30 ZR20 95Y 2 fitments
GenerationC8 2020–2027
MarketJapan
Power495 hp
Engine6.2L LT2 V8, Petrol
Center bore66.9 mm
PCD5x120
ThreadM14 x 1.5
Tire sizeRim size and bolt patternPressure, psiPrices
Front245/35 ZR19 89Y19x8.5 ET52 5x120–TiresRims
Rear305/30 ZR20 95Y20x11 ET64 5x120–TiresRims
Front285/30 ZR19 94Y19x10 ET43 5x120–TiresRims
Rear325/25 ZR20 99Y20x12 ET59 5x120–TiresRims
Reading the table

What these columns mean

OE fitment
The package fitted at the factory for that trim.
Alternative
A size the car accepts without modification — plus-sizing, winter setups or optional wheels.
Rim size
Rim diameter × width in inches, and the factory offset (ET) in millimetres, e.g. 18x7.5 ET25.
Bolt pattern (PCD)
Number of studs and the diameter of the circle they sit on. It must match exactly.
Center bore
Diameter of the hub hole. Larger aftermarket bores need hub-centric rings.
Pressure
Recommended cold inflation pressure for that axle, in psi.
Staggered
A wider tire on the rear axle than the front. Front-to-back rotation is not possible.
Thread size
Lug bolt or nut thread — needed when buying aftermarket fasteners.

Considering a different size?

Run your OE size against the one you want to see diameter change, ground clearance and speedometer error.