Skip to content

2016 Chevrolet Cruze Limited tire and wheel sizes, bolt pattern and tire pressure

Check the tables below for every tire size, wheel size, bolt pattern (PCD), rim offset and tire pressure fitted to the 2016 Chevrolet Cruze Limited.

2016 Chevrolet Cruze Limited tire sizes

Bolt pattern
Fitment tables

2 trims sold in 2016

Open a trim for its factory package and every alternative size, front and rear.

Chevrolet Cruze Limited HR

2016 – 2017 USA market 2 trims

Cruze Limited 1.4T

138 hp · 1.4L A14X I4 215/60 R16 94H 4 fitments
GenerationHR 2016–2017
Power138 hp
Engine1.4L A14X I4, Petrol
Center bore56.5 mm
PCD5x105
ThreadM12 x 1.5
Tire sizeRim size and bolt patternPressure, psiPrices
215/60 R16 94H16x6.5 ET39 5x10535TiresRims
215/55 R17 94V17x7 ET42 5x10535TiresRims
225/50 R17 93V17x7 ET42 5x10535TiresRims
225/45 R18 91V18x7.5 ET42 5x10535TiresRims

Cruze Limited 1.8i

138 hp · 1.8L N18X I4 215/60 R16 94H 4 fitments
GenerationHR 2016–2017
Power138 hp
Engine1.8L N18X I4, Petrol
Center bore56.5 mm
PCD5x105
ThreadM12 x 1.5
Tire sizeRim size and bolt patternPressure, psiPrices
215/60 R16 94H16x6.5 ET39 5x10535TiresRims
215/55 R17 94V17x7 ET42 5x10535TiresRims
225/50 R17 93V17x7 ET42 5x10535TiresRims
225/45 R18 91V18x7.5 ET42 5x10535TiresRims
Reading the table

What these columns mean

OE fitment
The package fitted at the factory for that trim.
Alternative
A size the car accepts without modification — plus-sizing, winter setups or optional wheels.
Rim size
Rim diameter × width in inches, and the factory offset (ET) in millimetres, e.g. 18x7.5 ET25.
Bolt pattern (PCD)
Number of studs and the diameter of the circle they sit on. It must match exactly.
Center bore
Diameter of the hub hole. Larger aftermarket bores need hub-centric rings.
Pressure
Recommended cold inflation pressure for that axle, in psi.
Staggered
A wider tire on the rear axle than the front. Front-to-back rotation is not possible.
Thread size
Lug bolt or nut thread — needed when buying aftermarket fasteners.

Considering a different size?

Run your OE size against the one you want to see diameter change, ground clearance and speedometer error.