Skip to content

2009 Chevrolet Cruze tire and wheel sizes, bolt pattern and tire pressure

Check the tables below for every tire size, wheel size, bolt pattern (PCD), rim offset and tire pressure fitted to the 2009 Chevrolet Cruze.

2009 Chevrolet Cruze tire sizes

Bolt patterns
5x105
I (HR)
5x115
I (HR)
Fitment tables

4 trims sold in 2009

Open a trim for its factory package and every alternative size, front and rear.

Chevrolet Cruze I (HR)

2009 – 2014 4 trims

Cruze 1.6i

111 hp · I4 205/65 R15 94V 3 fitments
GenerationI (HR) 2009–2014
Power111 hp
EngineI4, Petrol
Center bore56.6 mm
PCD5x105
ThreadM12 x 1.5
Tire sizeRim size and bolt patternPressure, psiPrices
205/65 R15 94V15x6.5 ET39 5x105–TiresRims
205/60 R16 92V16x6.5 ET39 5x10532TiresRims
215/50 R17 91V17x7 ET42 5x10532TiresRims

Cruze 1.6i

107 hp · 1.6L F16D3 I4 205/65 R15 94V 3 fitments
GenerationI (HR) 2009–2014
Power107 hp
Engine1.6L F16D3 I4, Petrol
Center bore56.6 mm
PCD5x105
ThreadM12 x 1.5
Tire sizeRim size and bolt patternPressure, psiPrices
205/65 R15 94V15x6.5 ET39 5x105–TiresRims
205/60 R16 92V16x6.5 ET39 5x10532TiresRims
215/50 R17 91V17x7 ET42 5x10532TiresRims

Cruze 1.8i

139 hp · 1.8L F18D4 Z18XER I4 205/65 R15 94V 3 fitments
GenerationI (HR) 2009–2014
Power139 hp
Engine1.8L F18D4 Z18XER I4, Petrol
Center bore56.6 mm
PCD5x105
ThreadM12 x 1.5
Tire sizeRim size and bolt patternPressure, psiPrices
205/65 R15 94V15x6.5 ET39 5x105–TiresRims
205/60 R16 92V 5x10532Tires
215/50 R17 91V17x7 ET42 5x10532TiresRims

Cruze 2.0 CDI

148 hp · I4 205/60 R16 92V 2 fitments
GenerationI (HR) 2009–2014
Power148 hp
EngineI4, Diesel
Center bore70.2 mm
PCD5x115
ThreadM12 x 1.5
Tire sizeRim size and bolt patternPressure, psiPrices
205/60 R16 92V 5x11532Tires
225/50 R17 94V17x7 ET44 5x11535TiresRims
Reading the table

What these columns mean

OE fitment
The package fitted at the factory for that trim.
Alternative
A size the car accepts without modification — plus-sizing, winter setups or optional wheels.
Rim size
Rim diameter × width in inches, and the factory offset (ET) in millimetres, e.g. 18x7.5 ET25.
Bolt pattern (PCD)
Number of studs and the diameter of the circle they sit on. It must match exactly.
Center bore
Diameter of the hub hole. Larger aftermarket bores need hub-centric rings.
Pressure
Recommended cold inflation pressure for that axle, in psi.
Staggered
A wider tire on the rear axle than the front. Front-to-back rotation is not possible.
Thread size
Lug bolt or nut thread — needed when buying aftermarket fasteners.

Considering a different size?

Run your OE size against the one you want to see diameter change, ground clearance and speedometer error.