Skip to content

2009 Chevrolet Epica tire and wheel sizes, bolt pattern and tire pressure

Check the tables below for every tire size, wheel size, bolt pattern (PCD), rim offset and tire pressure fitted to the 2009 Chevrolet Epica.

2009 Chevrolet Epica tire sizes

Bolt pattern
Fitment tables

3 trims sold in 2009

Open a trim for its factory package and every alternative size, front and rear.

Chevrolet Epica V250

2006 – 2012 3 trims

Epica 2.0D

148 hp · I4 205/65 R15 92H 4 fitments
GenerationV250 2006–2012
Power148 hp
EngineI4, Diesel
Center bore56.6 mm
PCD4x114.3
ThreadM12 x 1.5
Tire sizeRim size and bolt patternPressure, psiPrices
205/65 R15 92H15x6 ET49 4x114.330TiresRims
205/60 R16 92H16x6 ET49 4x114.332TiresRims
215/50 R17 91H17x7 ET49 4x114.332TiresRims
215/45 R18 90V18x7 ET49 4x114.335TiresRims

Epica 2.0i

141 hp · 2.0L X20D1 I6 205/65 R15 92H 4 fitments
GenerationV250 2006–2012
Power141 hp
Engine2.0L X20D1 I6, Petrol
Center bore56.6 mm
PCD4x114.3
ThreadM12 x 1.5
Tire sizeRim size and bolt patternPressure, psiPrices
205/65 R15 92H15x6 ET49 4x114.330TiresRims
205/60 R16 92H16x6 ET49 4x114.332TiresRims
215/50 R17 91H17x7 ET49 4x114.332TiresRims
215/45 R18 90V18x7 ET49 4x114.335TiresRims

Epica 2.5i

154 hp · 2.5L X25D1 I6 205/65 R15 92H 4 fitments
GenerationV250 2006–2012
Power154 hp
Engine2.5L X25D1 I6, Petrol
Center bore56.6 mm
PCD4x114.3
ThreadM12 x 1.5
Tire sizeRim size and bolt patternPressure, psiPrices
205/65 R15 92H15x6 ET49 4x114.330TiresRims
205/60 R16 91H16x6 ET49 4x114.332TiresRims
215/50 R17 91H17x7 ET49 4x114.332TiresRims
215/45 R18 90V18x7 ET49 4x114.335TiresRims
Reading the table

What these columns mean

OE fitment
The package fitted at the factory for that trim.
Alternative
A size the car accepts without modification — plus-sizing, winter setups or optional wheels.
Rim size
Rim diameter × width in inches, and the factory offset (ET) in millimetres, e.g. 18x7.5 ET25.
Bolt pattern (PCD)
Number of studs and the diameter of the circle they sit on. It must match exactly.
Center bore
Diameter of the hub hole. Larger aftermarket bores need hub-centric rings.
Pressure
Recommended cold inflation pressure for that axle, in psi.
Staggered
A wider tire on the rear axle than the front. Front-to-back rotation is not possible.
Thread size
Lug bolt or nut thread — needed when buying aftermarket fasteners.

Considering a different size?

Run your OE size against the one you want to see diameter change, ground clearance and speedometer error.