Skip to content

2026 Chevrolet Equinox EV tire and wheel sizes, bolt pattern and tire pressure

Check the tables below for every tire size, wheel size, bolt pattern (PCD), rim offset and tire pressure fitted to the 2026 Chevrolet Equinox EV.

2026 Chevrolet Equinox EV tire sizes

Bolt pattern
Fitment tables

2 trims sold in 2026

Open a trim for its factory package and every alternative size, front and rear.

Chevrolet Equinox EV Equinox EV

2024 – 2027 2 trims

Equinox EV Dual Motor

300 hp · Electric 245/55 R19 4 fitments
GenerationEquinox EV 2024–2027
MarketUSA
Power300 hp
EngineElectric, Electric
Center bore66.9 mm
PCD6x120
ThreadM14 x 1.5
FitTire sizeRim size and bolt patternPressure, psiPrices
OE245/55 R1919x8.5 ET55 6x12035TiresRims
OE275/40 R2121x9 ET60 6x120TiresRims
Alt245/50 R2020x8.5 ET55 6x120TiresRims
Alt255/45 R2121x8.5 ET55 6x120TiresRims

Equinox EV Single Motor

220 hp · Electric 245/55 R19 4 fitments
GenerationEquinox EV 2024–2027
MarketUSA
Power220 hp
EngineElectric, Electric
Center bore66.9 mm
PCD6x120
ThreadM14 x 1.5
FitTire sizeRim size and bolt patternPressure, psiPrices
OE245/55 R1919x8.5 ET55 6x12035TiresRims
OE275/40 R2121x9 ET60 6x120TiresRims
Alt245/50 R2020x8.5 ET55 6x120TiresRims
Alt255/45 R2121x8.5 ET55 6x120TiresRims
Reading the table

What these columns mean

OE fitment
The package fitted at the factory for that trim.
Alternative
A size the car accepts without modification — plus-sizing, winter setups or optional wheels.
Rim size
Rim diameter × width in inches, and the factory offset (ET) in millimetres, e.g. 18x7.5 ET25.
Bolt pattern (PCD)
Number of studs and the diameter of the circle they sit on. It must match exactly.
Center bore
Diameter of the hub hole. Larger aftermarket bores need hub-centric rings.
Pressure
Recommended cold inflation pressure for that axle, in psi.
Staggered
A wider tire on the rear axle than the front. Front-to-back rotation is not possible.
Thread size
Lug bolt or nut thread — needed when buying aftermarket fasteners.

Considering a different size?

Run your OE size against the one you want to see diameter change, ground clearance and speedometer error.