1996 Chevrolet G30 tire and wheel sizes, bolt pattern and tire pressure

Check the tables below for every tire size, wheel size, bolt pattern (PCD), rim offset and tire pressure fitted to the 1996 Chevrolet G30.

1996 Chevrolet G30 tire sizes

245/75RS16 245/75R16

Bolt pattern

8x165.1

Other years

1989 1990 1991 1992 1993 1994 1995 1996 All 1971–1996

Fitment tables

4 trims sold in 1996

Open a trim for its factory package and every alternative size, front and rear.

Chevrolet G30 III Facelift

1978 – 1995 4 trims

G30 262cid (Van)

156 hp · 4.3 L LB1 LB4 V6 Petrol 4.3 L LB1 LB4 V6 245/75 SR16 1 fitment

GenerationIII Facelift 1978–1995

MarketUSA

Power156 hp

Engine4.3 L LB1 LB4 V6 Petrol 4.3 L LB1 LB4 V6, Petrol

Center bore116.7 mm

PCD8x165.1

Tire size	Rim size and bolt pattern	Pressure, psi	Prices
245/75 SR16	16x7 ET0 ~~8x165.1~~	–	Tires Rims

G30 350cid (Van)

165 hp · 5.7 L LS9 V8 Petrol 5.7 L LS9 V8 245/75 SR16 1 fitment

GenerationIII Facelift 1978–1995

MarketUSA

Power165 hp

Engine5.7 L LS9 V8 Petrol 5.7 L LS9 V8, Petrol

Center bore116.7 mm

PCD8x165.1

Tire size	Rim size and bolt pattern	Pressure, psi	Prices
245/75 SR16	16x7 ET0 ~~8x165.1~~	–	Tires Rims

G30 395cid (Van)

174 hp · 6.5 L V8 Diesel 6.5 L V8 245/75 R16 1 fitment

GenerationIII Facelift 1978–1995

MarketUSA

Power174 hp

Engine6.5 L V8 Diesel 6.5 L V8, Diesel

Center bore116.7 mm

PCD8x165.1

Tire size	Rim size and bolt pattern	Pressure, psi	Prices
245/75 R16	16x7 ET0 ~~8x165.1~~	–	Tires Rims

G30 454cid (Van)

235 hp · 7.4 L V8 Petrol 7.4 L V8 245/75 SR16 1 fitment

GenerationIII Facelift 1978–1995

MarketUSA

Power235 hp

Engine7.4 L V8 Petrol 7.4 L V8, Petrol

Center bore116.7 mm

PCD8x165.1

Tire size	Rim size and bolt pattern	Pressure, psi	Prices
245/75 SR16	16x7 ET0 ~~8x165.1~~	–	Tires Rims

Reading the table

What these columns mean

OE fitment: The package fitted at the factory for that trim.
Alternative: A size the car accepts without modification — plus-sizing, winter setups or optional wheels.
Rim size: Rim diameter × width in inches, and the factory offset (ET) in millimetres, e.g. 18x7.5 ET25.
Bolt pattern (PCD): Number of studs and the diameter of the circle they sit on. It must match exactly.
Center bore: Diameter of the hub hole. Larger aftermarket bores need hub-centric rings.
Pressure: Recommended cold inflation pressure for that axle, in psi.
Staggered: A wider tire on the rear axle than the front. Front-to-back rotation is not possible.
Thread size: Lug bolt or nut thread — needed when buying aftermarket fasteners.