1961 Chevrolet Impala tire and wheel sizes, bolt pattern and tire pressure

Check the tables below for every tire size, wheel size, bolt pattern (PCD), rim offset and tire pressure fitted to the 1961 Chevrolet Impala.

1961 Chevrolet Impala tire sizes

195/80R14 205/70R15

Bolt pattern

Other years

Fitment tables

Open a trim for its factory package and every alternative size, front and rear.

1961 – 1964 3 trims

135 hp · 3.8L I6 7.50x D14 5 fitments

GenerationIII 1961–1964

Power135 hp

Engine3.8L I6, Petrol

Center bore70.3 mm

PCD5x120.65

Thread7/16" - 20 UNF

Tire size	Rim size and bolt pattern	Pressure, psi	Prices
7.50x D14	14x5 ET14.2 ~~5x120.65~~	24	Tires Rims
8.00x D14	14x5.5 ET11.2 ~~5x120.65~~	24	Tires Rims
8.50x D14	14x5.5 ET11.2 ~~5x120.65~~	24	Tires Rims
195/80 R14	14x5.5 ET10 ~~5x120.65~~	26	Tires Rims
205/70 R15	15x6 ET10 ~~5x120.65~~	26	Tires Rims

185 hp · 4.6L V8 7.50x D14 5 fitments

GenerationIII 1961–1964

Power185 hp

Engine4.6L V8, Petrol

Center bore70.3 mm

PCD5x120.65

Thread7/16" - 20 UNF

Tire size	Rim size and bolt pattern	Pressure, psi	Prices
7.50x D14	14x5 ET14.2 ~~5x120.65~~	24	Tires Rims
8.00x D14	14x5.5 ET11.2 ~~5x120.65~~	24	Tires Rims
8.50x D14	14x5.5 ET11.2 ~~5x120.65~~	24	Tires Rims
195/80 R14	14x5.5 ET10 ~~5x120.65~~	26	Tires Rims
205/70 R15	15x6 ET10 ~~5x120.65~~	26	Tires Rims

250 hp · 5.7L V8 7.50x D14 5 fitments

GenerationIII 1961–1964

Power250 hp

Engine5.7L V8, Petrol

Center bore70.3 mm

PCD5x120.65

Thread7/16" - 20 UNF

Tire size	Rim size and bolt pattern	Pressure, psi	Prices
7.50x D14	14x5 ET14.2 ~~5x120.65~~	24	Tires Rims
8.00x D14	14x5.5 ET11.2 ~~5x120.65~~	24	Tires Rims
8.50x D14	14x5.5 ET11.2 ~~5x120.65~~	24	Tires Rims
195/80 R14	14x5.5 ET10 ~~5x120.65~~	26	Tires Rims
205/70 R15	15x6 ET10 ~~5x120.65~~	26	Tires Rims

Reading the table

OE fitment: The package fitted at the factory for that trim.
Alternative: A size the car accepts without modification — plus-sizing, winter setups or optional wheels.
Rim size: Rim diameter × width in inches, and the factory offset (ET) in millimetres, e.g. 18x7.5 ET25.
Bolt pattern (PCD): Number of studs and the diameter of the circle they sit on. It must match exactly.
Center bore: Diameter of the hub hole. Larger aftermarket bores need hub-centric rings.
Pressure: Recommended cold inflation pressure for that axle, in psi.
Staggered: A wider tire on the rear axle than the front. Front-to-back rotation is not possible.
Thread size: Lug bolt or nut thread — needed when buying aftermarket fasteners.