1979 Chevrolet K10 tire and wheel sizes, bolt pattern and tire pressure

Check the tables below for every tire size, wheel size, bolt pattern (PCD), rim offset and tire pressure fitted to the 1979 Chevrolet K10.

1979 Chevrolet K10 tire sizes

235/75R15

Bolt pattern

Other years

Fitment tables

Open a trim for its factory package and every alternative size, front and rear.

1975 – 1980 2 trims

130 hp · 4.1L LE3 I6 235/75 R15 1 fitment

GenerationIII Facelift 1975–1980

Power130 hp

Engine4.1L LE3 I6, Petrol

Center bore101 mm

PCD6x139.7

Thread7/16" - 20 UNF

Tire size	Rim size and bolt pattern	Pressure, psi	Prices
235/75 R15	15x6 ET0 ~~6x139.7~~	–	Tires Rims

165 hp · 5.7L LS9 V8 235/75 R15 1 fitment

GenerationIII Facelift 1975–1980

Power165 hp

Engine5.7L LS9 V8, Petrol

Center bore101 mm

PCD6x139.7

Thread7/16" - 20 UNF

Tire size	Rim size and bolt pattern	Pressure, psi	Prices
235/75 R15	15x6 ET0 ~~6x139.7~~	–	Tires Rims

Reading the table

OE fitment: The package fitted at the factory for that trim.
Alternative: A size the car accepts without modification — plus-sizing, winter setups or optional wheels.
Rim size: Rim diameter × width in inches, and the factory offset (ET) in millimetres, e.g. 18x7.5 ET25.
Bolt pattern (PCD): Number of studs and the diameter of the circle they sit on. It must match exactly.
Center bore: Diameter of the hub hole. Larger aftermarket bores need hub-centric rings.
Pressure: Recommended cold inflation pressure for that axle, in psi.
Staggered: A wider tire on the rear axle than the front. Front-to-back rotation is not possible.
Thread size: Lug bolt or nut thread — needed when buying aftermarket fasteners.