1995 Chevrolet Kadett tire and wheel sizes, bolt pattern and tire pressure

Check the tables below for every tire size, wheel size, bolt pattern (PCD), rim offset and tire pressure fitted to the 1995 Chevrolet Kadett.

1995 Chevrolet Kadett tire sizes

175/70R13

Bolt pattern

4x100

Other years

1991 1992 1993 1994 1995 1996 1997 1998 All 1989–1998

Fitment tables

4 trims sold in 1995

Open a trim for its factory package and every alternative size, front and rear.

Chevrolet Kadett Kadett

1989 – 1998 4 trims

Kadett 1.8

97 hp · I4 175/70 R13 82T 1 fitment

GenerationKadett 1989–1998

Power97 hp

EngineI4, Petrol

Center bore56.6 mm

PCD4x100

ThreadM12 x 1.5

Tire size	Rim size and bolt pattern	Pressure, psi	Prices
175/70 R13 82T	13x5.5 ET49 ~~4x100~~	29	Tires Rims

Kadett 1.8

94 hp · I4 175/70 R13 82T 1 fitment

GenerationKadett 1989–1998

Power94 hp

EngineI4, Petrol

Center bore56.6 mm

PCD4x100

ThreadM12 x 1.5

Tire size	Rim size and bolt pattern	Pressure, psi	Prices
175/70 R13 82T	13x5.5 ET49 ~~4x100~~	29	Tires Rims

Kadett 2.0

114 hp · I4 Ethanol 175/70 R13 82T 1 fitment

GenerationKadett 1989–1998

Power114 hp

EngineI4 Ethanol

Center bore56.6 mm

PCD4x100

ThreadM12 x 1.5

Tire size	Rim size and bolt pattern	Pressure, psi	Prices
175/70 R13 82T	13x5.5 ET49 ~~4x100~~	29	Tires Rims

Kadett 2.0

119 hp · I4 175/70 R13 82T 1 fitment

GenerationKadett 1989–1998

Power119 hp

EngineI4, Petrol

Center bore56.6 mm

PCD4x100

ThreadM12 x 1.5

Tire size	Rim size and bolt pattern	Pressure, psi	Prices
175/70 R13 82T	13x5.5 ET49 ~~4x100~~	29	Tires Rims

Reading the table

What these columns mean

OE fitment: The package fitted at the factory for that trim.
Alternative: A size the car accepts without modification — plus-sizing, winter setups or optional wheels.
Rim size: Rim diameter × width in inches, and the factory offset (ET) in millimetres, e.g. 18x7.5 ET25.
Bolt pattern (PCD): Number of studs and the diameter of the circle they sit on. It must match exactly.
Center bore: Diameter of the hub hole. Larger aftermarket bores need hub-centric rings.
Pressure: Recommended cold inflation pressure for that axle, in psi.
Staggered: A wider tire on the rear axle than the front. Front-to-back rotation is not possible.
Thread size: Lug bolt or nut thread — needed when buying aftermarket fasteners.