Skip to content

2012 Chevrolet Lacetti tire and wheel sizes, bolt pattern and tire pressure

Check the tables below for every tire size, wheel size, bolt pattern (PCD), rim offset and tire pressure fitted to the 2012 Chevrolet Lacetti.

2012 Chevrolet Lacetti tire sizes

Bolt pattern
Fitment tables

2 trims sold in 2012

Open a trim for its factory package and every alternative size, front and rear.

Chevrolet Lacetti J200

2003 – 2013 2 trims

Lacetti 1.4i

94 hp · 1.4L F14D3 I4 175/70 R14 84T 4 fitments
GenerationJ200 2003–2013
Power94 hp
Engine1.4L F14D3 I4, Petrol
Center bore56.6 mm
PCD4x114.3
ThreadM12 x 1.5
Tire sizeRim size and bolt patternPressure, psiPrices
175/70 R14 84T14x5.5 ET44 4x114.330TiresRims
185/65 R14 85V14x5.5 ET44 4x114.330TiresRims
195/55 R15 85V15x6 ET44 4x114.330TiresRims
185/65 R14 85V14x6 ET46 4x114.330TiresRims

Lacetti 1.6i

107 hp · 1.6L F16D3 I4 175/70 R14 84T 4 fitments
GenerationJ200 2003–2013
Power107 hp
Engine1.6L F16D3 I4, Petrol
Center bore56.6 mm
PCD4x114.3
ThreadM12 x 1.5
Tire sizeRim size and bolt patternPressure, psiPrices
175/70 R14 84T14x5.5 ET44 4x114.330TiresRims
185/65 R14 85V14x5.5 ET44 4x114.330TiresRims
195/55 R15 85V15x6 ET44 4x114.330TiresRims
185/65 R14 85V14x6 ET46 4x114.330TiresRims
Reading the table

What these columns mean

OE fitment
The package fitted at the factory for that trim.
Alternative
A size the car accepts without modification — plus-sizing, winter setups or optional wheels.
Rim size
Rim diameter × width in inches, and the factory offset (ET) in millimetres, e.g. 18x7.5 ET25.
Bolt pattern (PCD)
Number of studs and the diameter of the circle they sit on. It must match exactly.
Center bore
Diameter of the hub hole. Larger aftermarket bores need hub-centric rings.
Pressure
Recommended cold inflation pressure for that axle, in psi.
Staggered
A wider tire on the rear axle than the front. Front-to-back rotation is not possible.
Thread size
Lug bolt or nut thread — needed when buying aftermarket fasteners.

Considering a different size?

Run your OE size against the one you want to see diameter change, ground clearance and speedometer error.